{"title":"Fabrication","description":"\u003cp\u003eFabrication parts for custom Jeep and off-road projects, including builder tabs and gussets, tube components, chassis conversion parts, and fuel-system components. Check each product for application details and fabrication requirements.\u003c\/p\u003e","products":[{"product_id":"motobilt-mb2081","title":"Zip Tie Mount For Upper Suspension Link Motobilt","description":"\u003cp\u003eThe Motobilt link mount zip tie mount is a great way to route your lines, wiring, hoses, and more. They are CNC laser cut out of 1\/8 inch thick P and O Steel plate. These mounts can be used to route hydraulic hoses, brake hoses\/lines, air lines, or just about anything. They have slots on each end that allow you to mount them directly to your link with a hose clamp The slots allow you to mount the hose, lines, et via a zip tie. Using the Motobilt link mount zip tie mounts will allow you to route your lines safely and securely out of harms way. They provide a clean and slick professional install.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLink zip tie mount\u003c\/li\u003e\n\u003cli\u003eCNC laser cut out of 1\/8 inch thick P and O Steel plate\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese mounts can be used to route hydraulic hoses, brake hoses\/lines, air lines, or just about anything\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271370879147,"sku":"MB2081-HJQL","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2081-HJQL_c5014538-7b67-41fe-840a-ef78ac2b7768.jpg?v=1792076471"},{"product_id":"motobilt-mb1500","title":"Jeep YJ Wheelbase Stretch Kit Motobilt","description":"\u003cp\u003eThe Motobilt Jeep Wrangler YJ Wheelbase Stretch Kit is a great way to move your rear axle back roughly 6 inches. The Motobilt Jeep Wrangler Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep YJ (1987-1995). Installing this kit moves the rear axle back about 6 inches. The kit incorporates a custom rear bumper and shackle hangers in one part. The shackle hangers are positioned high on the bumper to keep the overall Jeep ride height lower for better center of gravity. The ends of the bumper are tapered in to allow better clearance for the shackles with the rear axle at full droop.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a custom set of leaf spring shackles designed to clear the bumper in the range of movement. The rear bumper also features 3\/4 inch thick d-ring recovery mounts that pass through the bumper and welded on both sides. The bumper welds to the back of the factory cross member and has two side frame plates to cover the sides. This kit does include new spring shackles as noted. The shackles are CNC laser cut from 1\/4 inch high strength steel plate. The shackles measure 4 inches center to center and do have a 3rd cross bolt for additional support.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler YJ Wheelbase Stretch Kit\u003c\/li\u003e\n\u003cli\u003e1987-1995 Jeep Wrangler YJ\u003c\/li\u003e\n\u003cli\u003eThe bumper is 3\/16 inch laser cut steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eIncorporated shackle mounts\u003c\/li\u003e\n\u003cli\u003eMoves the axle back 6 inches\u003c\/li\u003e\n\u003cli\u003eMeasures 42.5 inch wide\u003c\/li\u003e\n\u003cli\u003eIncludes new shackles and shackle spacer\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePurchase PN BushingKit if you require the shackle bushing kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271370944683,"sku":"MB1500-HJQL","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB1500-HJQL_3504b6f0-2337-463a-814a-1e049f6092f0.jpg?v=1792076481"},{"product_id":"motobilt-mb3002","title":"4 Bolt Tube Flange For 1.75 Inch O.D. Round Tube Motobilt","description":"\u003cp\u003eThe 4 bolt flange can be used for many things. The primary use is the make a section of tube removable. The flanges are also used for connecting tube through a firewall ot other sheetmetal. The Motobilt 4 bolt tube flange is CNC laser cut from 3\/16 inch high strength steel plate. The bolt holes are designed to be used with 3\/8 inch bolts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 bolt tube flange for 1.75 inch OD round tube\u003c\/li\u003e\n\u003cli\u003eCNC laser cut from 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt holes designed for 3\/8 inch bolts\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271416000683,"sku":"MB3002-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3002-HJQL.jpg?v=1792077112"},{"product_id":"motobilt-mb2051","title":"Zip Tie Tabs Motobilt","description":"\u003cp\u003eWeld on tabs to secure wires, air lines, brake lines, fuel lines and more. This can be used with zip ties up to 1\/4 inch wide. CNC cut from steel plate. Welding required to install. Can be used on round tube or flat surfaces. Comes in pack of 10.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZip tie tabs\u003c\/li\u003e\n\u003cli\u003eUsed with zip ties up to 1\/4 inch wide\u003c\/li\u003e\n\u003cli\u003eCNC cut from steel plate\u003c\/li\u003e\n\u003cli\u003eSold as pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWelding required to install\u003c\/li\u003e\n\u003cli\u003eCan be used on round tube or flat surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271421898923,"sku":"MB2051-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2051-HJQL.jpg?v=1792077133"},{"product_id":"motobilt-mb1519","title":"Jeep CJ Wheelbase Stretch Kit Motobilt","description":"\u003cp\u003eThe Motobilt Jeep CJ Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep CJ (1976-1986). Installing this kit moves the rear axle back about 6 inches. The kit incorporates a custom rear bumper and shackle hangers in one part. The shackle hangers are positioned high on the bumper to keep the overall Jeep ride height lower for better center of gravity. The ends of the bumper are tapered in to allow better clearance for the shackles with the rear axle at full drop.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a custom set of leaf spring shackles designed to clear the bumper in the range of movement. The rear bumper also features 3\/4 inch thick d-ring recovery mounts that pass through the bumper and welded on both sides. The bumper welds to the back of the factory cross member and has two side frame plates to cover the sides. This kit does include new spring shackles as noted. The shackles are CNC laser cut from 1\/4 inch high strength steel plate.\u003c\/p\u003e\n\u003cp\u003eThe shackles measure 4 inches center to center and do have a 3rd cross bolt for additional support. The kit does not include poly bushings. The kit does require removing the factory gas tank. Many people install an aftermarket fuel cell.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ Wheelbase Stretch Kit\u003c\/li\u003e\n\u003cli\u003eFit 1976-1986 Jeep CJ\u003c\/li\u003e\n\u003cli\u003eThe bumper is 3\/16 inch laser cut steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eIncorporated shackle mounts\u003c\/li\u003e\n\u003cli\u003eMoves the axle back 6 inches\u003c\/li\u003e\n\u003cli\u003eMeasures 38 inch wide\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardware kit sold separately\u003c\/li\u003e\n\u003cli\u003eShackle bushing kit sold separately PN BushingKit\u003c\/li\u003e\n\u003cli\u003eIncludes new shackles and shackle spacers\u003c\/li\u003e\n\u003cli\u003eThe kit does require removing the factory gas tank\u003c\/li\u003e\n\u003cli\u003eMany people install an aftermarket fuel cell\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271425339563,"sku":"MB1519-HJQL","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB1519-HJQL_ce4dcc78-6876-4296-a6a9-2097f53cd168.jpg?v=1792077143"},{"product_id":"motobilt-mb1041-1","title":"Weld On Tube Armor Motobilt","description":"\u003cp\u003eThe Motobilt MB1041 weld on tie rod\/link armor is made out of heavy duty 3\/16 inch thick steel plate that is both laser cut and CNC bent.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld on tube armor\u003c\/li\u003e\n\u003cli\u003eLaser cut and CNC bent of 3\/16 thick steel plate\u003c\/li\u003e\n\u003cli\u003eComes in lengths of 42 inches and has many uses\u003c\/li\u003e\n\u003cli\u003eEasily cut down into smaller sections\u003c\/li\u003e\n\u003cli\u003eWeld it to your tie rod, suspension links, or other tube type armor\u003c\/li\u003e\n\u003cli\u003eStrengthens tubing while preventing it from denting or caving upon impact\u003c\/li\u003e\n\u003cli\u003eUses for this armor are endless\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271426486443,"sku":"MB1041-1-HJQL","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB1041-1-HJQL.jpg?v=1792077145"},{"product_id":"motobilt-mb2095","title":"Universal Mounting Ring \/ Handle Motobilt","description":"\u003cp\u003eThe Motobilt universal mounting rings\/handles.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser cut out of 3\/8 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003e6.5 inch long and 2.25 inch tall\u003c\/li\u003e\n\u003cli\u003eUse them for a grab handle on your rig\u003c\/li\u003e\n\u003cli\u003eWeld them onto your trailer for a tie down\/ratchet mount\u003c\/li\u003e\n\u003cli\u003eThousands of uses\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271436513451,"sku":"MB2095-HJQL","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2095-HJQL.jpg?v=1792077199"},{"product_id":"motobilt-mb2037","title":"LS \/ LQ Engine Mount Brackets Motobilt","description":"\u003cp\u003eThe Motobilt LS \/ LQ engine mounting bracket plates are CNC cut for precision. Mounting a LS\/LQ based engine in a tube chassis, Jeep, hotrod, ratrod or other application is made easier with these mounting plates. The plates are a builder part. You will be required to fabricate mounts to the plates. The brackets are CNC cut from 1\/4 inch high strength steel plate. The brackets sell in pairs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLS\/LQ Engine mount brackets\u003c\/li\u003e\n\u003cli\u003eCNC cut 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou will be required to fabricate mounts to the plates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271436873899,"sku":"MB2037-HJQL","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2037-HJQL.jpg?v=1792077209"},{"product_id":"motobilt-mb2036","title":"Small Block Chevy Mount Brackets Motobilt","description":"\u003cp\u003eMounting a Small Block Chevy 350 in a tube chassis, Jeep, hotrod, ratrod or other application is made easier with these mounting plates. The plates are a builder part. You will be required to fabricate mounts to the plates. The brackets are CNC laser cut from 1\/4 inch high strength steel plate. The brackets sell in pairs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall Block Chevy mount brackets\u003c\/li\u003e\n\u003cli\u003eCNC laser cut from 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou will be required to fabricate mounts to the plates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271436906667,"sku":"MB2036-HJQL","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2036-HJQL.jpg?v=1792077209"},{"product_id":"motobilt-mb5507","title":"Spacer 3\/16 Inch Steel Pair Motobilt","description":"\u003cp\u003eMotobilt 3\/16 inch thick spacer with a 5\/16 inch ID x 7\/8 inch OD. Has many uses where a 3\/16 inch small washer might be needed, including light bar mount spacers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/16 Spacer\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271436939435,"sku":"MB5507-HJQL","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5507-HJQL.jpg?v=1792077210"},{"product_id":"motobilt-mb2094","title":"Spider Web Gusset 90 Degree Motobilt","description":"\u003cp\u003eAdd style and function to your fabrication projects with the Motobilt Spider Web Gusset.The Motobilt 90 Degree Spider Web gusset is CNC Laser cut from 3\/16 inch thick steel. The 90 Degree Spider Web gusset measures 3 inches tall and 3 inch wide. The gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90 Degree Spider web gusset\u003c\/li\u003e\n\u003cli\u003e3 inch by 3 inch\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut 3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438119083,"sku":"MB2094-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2094-HJQL.jpg?v=1792077243"},{"product_id":"motobilt-mb2092","title":"4 Inch Eye Gusset 90 Degree Motobilt","description":"\u003cp\u003eThe Motobilt 4 inch gusset is laser cut from 3\/16 inch thick high strength steel plate. The legs are 4 inch and is set at 90 degrees.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 inch eye gusset 90 degree\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThese are great for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoll cages\u003c\/li\u003e\n\u003cli\u003eBumpers\u003c\/li\u003e\n\u003cli\u003eTube chassis\u003c\/li\u003e\n\u003cli\u003eTables\u003c\/li\u003e\n\u003cli\u003eFixtures\u003c\/li\u003e\n\u003cli\u003eTrailers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438151851,"sku":"MB2092-HJQL","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2092-HJQL.jpg?v=1792077243"},{"product_id":"motobilt-mb2088","title":"80 Degree Spiderweb Gusset Motobilt","description":"\u003cp\u003eThe Motobilt 80 degree Spiderweb gusset is is CNC Laser cut from 3\/16 inch thick steel. The Spiderweb gusset measures 3 inches tall and 4 inches wide. The gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more. Spiderweb Gusset Features: 3 inches by 3 inches 3\/16 inch thick CNC Laser Cut Adds function and style. This Motobilt part requires mig or tig welding for installation by an experienced welder.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80 degree Spiderweb gusset\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick steel\u003c\/li\u003e\n\u003cli\u003e3 inches tall and 4 inches wide\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more\u003c\/li\u003e\n\u003cli\u003ehis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438184619,"sku":"MB2088-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2088-HJQL.jpg?v=1792077243"},{"product_id":"motobilt-mb2085","title":"4 Inch Skull Gusset Motobilt","description":"\u003cp\u003eMotobilt offers a 4 inch Skull gusset. Skull gusset is laser cut from 3\/16 inch plate and measures 4 inch on each of the flat sides.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438217387,"sku":"MB2085-HJQL","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2085-HJQL.jpg?v=1792077245"},{"product_id":"motobilt-mb2050","title":"3x3x.125 Gusset 30 Degree Motobilt","description":"\u003cp\u003eMotobilt 3 x 3 x.125 Gusset has 30 degree angle and measures 2.75 inch on the flat side.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438282923,"sku":"MB2050-HJQL","price":2.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2050-HJQL.jpg?v=1792077248"},{"product_id":"motobilt-mb2041","title":"Two Tear Gusset 3x3 Inch Steel Motobilt","description":"\u003cp\u003eThe Motobilt Two Tear Gusset is CNC Laser cut from 3\/16 inch thick steel. The Two Tear Gusset measures 3 inches tall and 3 inches wide. The gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more. Two Tear Gusset Features 3 inches by 3 inches 3\/16 inch thick CNC Laser Cut Adds function and style. This Motobilt part requires mig or tig welding for installation by an experienced welder.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo tear gusset\u003c\/li\u003e\n\u003cli\u003e3 inch tall and 3 inch wide\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut 3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop\u003c\/li\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438381227,"sku":"MB2041-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2041-HJQL.jpg?v=1792077250"},{"product_id":"motobilt-mb2040","title":"Curves Corner Gusset 3x3 Inch Steel Motobilt","description":"\u003cp\u003eThe Motobilt Curve Corner Gusset is CNC Laser cut from 3\/16 inch thick steel. The Curve Corner Gusset measures 3 inches tall and 3 inches wide. The gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more. Curve Corner Gusset Features 3 inches by 3 inches 3\/16 inch thick CNC Laser Cut Adds function and style. This Motobilt part requires mig or tig welding for installation by an experienced welder.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurve corner gusset\u003c\/li\u003e\n\u003cli\u003e3 inch tall and 3 inch wide\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut 3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop\u003c\/li\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438512299,"sku":"MB2040-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2040-HJQL.jpg?v=1792077252"},{"product_id":"motobilt-mb2039","title":"Scalloped Two Hole Gusset 3x3 Inch Steel Motobilt","description":"\u003cp\u003eThe Motobilt Scalloped Two-Hole Gusset is CNC Laser cut from 3\/16 inch thick steel. The Scalloped Two-Hole Gusset measures 3 inches tall and 3 inches wide. The gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more. Scalloped Two-Hole Gusset Features 3 inches by 3 inches 3\/16 inch thick CNC Laser Cut Adds function and style. This Motobilt part requires mig or tig welding for installation by an experienced welder.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScalloped two-hole gusset\u003c\/li\u003e\n\u003cli\u003e3 inch tall and 3 inch wide\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut 3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop\u003c\/li\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438545067,"sku":"MB2039-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2039-HJQL.jpg?v=1792077253"},{"product_id":"motobilt-mb2014","title":"Two Slot Gusset 3x3 Inch Steel Motobilt","description":"\u003cp\u003eAdd style and function to you fabrication projects with the Motobilt 2 slot gusset. The Motobilt two slot gusset is CNC Laser cut from 3\/16 inch thick steel. The two slot gusset measures 3 inches tall and 3 inches wide.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 slot gusset\u003c\/li\u003e\n\u003cli\u003e3 inch tall by 3 inch wide\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438577835,"sku":"MB2014-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2014-HJQL.jpg?v=1792077254"},{"product_id":"motobilt-mb2001","title":"Tie Down Gusset Steel 3x3 Inch Steel Motobilt","description":"\u003cp\u003eAdd style and function to you fabrication projects with the Motobilt tie down gusset. The Motobilt Tie Down Gusset is CNC Laser cut from 3\/16 inch thick steel. The Tie Down Gusset measures 3 inches tall and 3 inches wide.\u003cbr\u003e\u003cstrong\u003eBottle Opener Gusset Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTie down gusset\u003c\/li\u003e\n\u003cli\u003e3 inch tall by 3 inch wide\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003cli\u003eThe gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438610603,"sku":"MB2001-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2001-HJQL.jpg?v=1792077256"},{"product_id":"motobilt-mb5509","title":"Grimple Plate 12 Inch Bolt Hole To Bolt Hole Motobilt","description":"\u003cp\u003eThe Motobilt Grimple plate is flared to add traction to slippery surfaces with flared dimple died holes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures approx. 12 inch from bolt hole to bolt hole with approx. 13 inch total length\u003c\/li\u003e\n\u003cli\u003eShips bare metal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438807211,"sku":"MB5509-HJQL","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5509-HJQL.jpg?v=1792077261"},{"product_id":"motobilt-mb5007","title":"Jeep TJ Fuel Pump Clamping Ring 97-06 Wrangler TJ Motobilt","description":"\u003cp\u003eThe Motobilt Jeep TJ Fuel Pump\/Sending Unit Clamping ring is a quick and easy solution to install the factory fuel pump to an after market fuel tank or fuel cell. The Motobilt Jeep TJ Fuel Pump\/Sending Unit Clamping Ring is designed to be used with fuel cells like the RCI 2161a. Installing the ring is simple. You can use the adapter ring as a template to drill holes in your fuel tank. The kit is shipped with the upper clamp ring assembly; which is welded together on the bottom side. Unlike some of the others on the market, we have the bolts passing through both plate to prevent the ring from deforming when you tighten it down.\u003c\/p\u003e\n\u003cp\u003eThe bottom ring that goes inside the tank has a split in the ring so you can get it into the tank. This ring allows the top and the ring to bolt down without deforming the fuel tank or fuel cell. The upper ring assembly is CNC cut from 1\/8 inch thick steel and the inner split ring is CNC cut from 14 GA steel. The top ring is powdercoated black and the bottom rings are shipped out bare metal. The kit also includes (12) 1\/4-28 bolts, lock nuts, and nylon washers. Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ Fuel Pump\/Sending Unit Clamping ring\u003c\/li\u003e\n\u003cli\u003eUpper ring assembly is CNC cut from 1\/8 inch thick steel\u003c\/li\u003e\n\u003cli\u003eInner split ring is CNC cut from 14 GA steel\u003c\/li\u003e\n\u003cli\u003eTop ring is powdercoated black\u003c\/li\u003e\n\u003cli\u003eBottom rings are shipped bare metal\u003c\/li\u003e\n\u003cli\u003eIncludes (12) 1\/4-28 bolts, lock nuts, and nylon washers\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438872747,"sku":"MB5007-HJQL","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5007-HJQL.jpg?v=1792077263"},{"product_id":"motobilt-mb5004","title":"Fuel Cell Mount For RCI 2171 F Motobilt","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the RCI 2171 with dimple die holes was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of six parts including the main under tank plate, the top retaining plate, and 4 connecting legs. The main under tank plate is a one piece design that eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\n\u003cp\u003eThe the top retaining plate and 4 legs capture the top and bolt securely to the mounting base. These parts are CNC Laser Cut from 16 gauge steel. The parts are formed on a hydraulic press break. The Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part. The bolts to mount the top retaining plate to the top of the legs are included but the lower mounting bolts required are not shipped due to the different mounting options. The fuel cell (RCI 2171) is not included with the mount.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRCI 2171 fuel cell mount with dimple die holes\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from .125 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eTop retaining plate and 4 legs re CNC Laser Cut from 16 gauge steel\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\n\u003cli\u003eThe bolts to mount the top retaining plate to the top of the legs are included but the lower mounting bolts required are not shipped due to the different mounting options\u003c\/li\u003e\n\u003cli\u003eThe fuel cell (RCI 2171) is not included with the mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438905515,"sku":"MB5004-HJQL","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5004_4-HJQL.jpg?v=1792077265"},{"product_id":"motobilt-mb3010","title":"Fuel Cell Mount For 30x12x12 Fuel Cells Motobilt","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the 30 x 12 x 12 or the MB5010 TJ\/LJ was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of three parts including the main under tank plate and two clamp bodies. The main under tank plate is a one piece design unlike some of the others on the market.\u003c\/p\u003e\n\u003cp\u003eThis design cost a little more to manufacture due to the large plate. It eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\n\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press brake.\u003cbr\u003e The Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part. The bolts required are not shipped due to the different mounting options. The fuel cell  is not included with the mount.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Cell Mount for the 30 x 12 x 12\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut but from 16 gauge steel\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from .125 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\n\u003cli\u003eBolts not included\u003c\/li\u003e\n\u003cli\u003eThe fuel cell not included\u003c\/li\u003e\n\u003cli\u003eDimple die holes available option\u003c\/li\u003e\n\u003cli\u003eThe RCI2191A Fuel Cell has gone through many changes over the years and you will need to verify the top of your fuel cell before ordering to ensure it will work for your application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438938283,"sku":"MB3010-HJQL","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3010-HJQL.jpg?v=1792077265"},{"product_id":"motobilt-mb3000","title":"Fuel Cell Mount For 30x9x12 Fuel Cells Motobilt","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the MB5005  was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of three parts including the main under tank plate and two clamp bodies. The main under tank plate is a one piece design unlike some of the others on the market.  If you are using an RCI 2161a you must verify the locations of the filler neck and other components before ordering our mount.\u003c\/p\u003e\n\u003cp\u003eThis design cost a little more to manufacture due to the large plate. It eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\n\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press brake.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Cell Mount for the MB5005 or other cells meassuring 30 in x 9 in x 12 in\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut but from 16 gauge steel\u003c\/li\u003e\n\u003cli\u003eUnder tank plate CNC laser cut from .125 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Fuel cell mount is ships bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\n\u003cli\u003eThe bolts required are not included\u003c\/li\u003e\n\u003cli\u003eThe fuel cell is not included with the mount\u003c\/li\u003e\n\u003cli\u003eThis universal mount and can be used in off-road vehicles, rat rods, street rods, drag racing, and more\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271438971051,"sku":"MB3000-HJQL","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3000-HJQL.jpg?v=1792077267"},{"product_id":"motobilt-mb5006","title":"Remote Fuel Cell Filler Mount Motobilt","description":"\u003cp\u003eMotobilt now offers a remote fuel cell filler mount bracket. Bracket is made out of 1\/8 inch P and O Plate. Fits 6 or 12 bolt flange. Made to fit 1-3\/4 inch tube.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemote fuel cell filler mount\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271439003819,"sku":"MB5006-HJQL","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5006-HJQL.jpg?v=1792077268"},{"product_id":"motobilt-mb5010-tj","title":"Jeep TJ\/LJ Aluminum Fuel Cell 19 Gallon 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eMotobilt MB5010-TJ offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount will fit this tank perfectly.\u003c\/p\u003e\n\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep TJ\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eYou must purchase the Clamping ring MB5007 if you have not already done so previously\u003c\/li\u003e\n\u003cli\u003eFuel mount sold separately PN MB5010\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271439462571,"sku":"MB5010-TJ-HJQL","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5010-TJ-HJQL.jpg?v=1792077271"},{"product_id":"motobilt-mb5009","title":"LS Engine ECM Mount Motobilt","description":"\u003cp\u003eThe Motobilt LS Engine ECM Mount is laser cut and formed out of 14 gauge steel. The LS Engine ECM Mount allows you to mount your ECM in universal locations. Mount comes in two pieces that are approximately 2.625 inch tall and approximately 5 inch wide at the bases. The outside bolt holes are approximately 4 inch apart from center point to center point, and has a bolt hole in the center. Ships bare metal with no hardware, because it reuses the factory screws in the ECM.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLS Engine ECM Mount\u003c\/li\u003e\n\u003cli\u003eLaser cut 14 gauge steel\u003c\/li\u003e\n\u003cli\u003etwo pieces that are approximately 2.625 inch tall and approximately 5 inch wide at the base\u003c\/li\u003e\n\u003cli\u003eOutside holes are 4 inch apart center point to center point\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003cli\u003eHardware not included\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271441723563,"sku":"MB5009-HJQL","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5009-HJQL.jpg?v=1792077335"},{"product_id":"motobilt-mb2027","title":"90 Degree Weld On D-Ring Mount Motobilt","description":"\u003cp\u003eThe 90 degree weld on d-ring mount measures 3.75 inch on the long flat base and 1.75 inch on the shorter base. The d-ring mount is CNC Laser Cut from 3\/4 inch thick high strength steel plate. The through hole is 1 inch. The part requires welding to install. The weld on d-ring mount is perfect for adding a recovery point to bumpers, tube chassis, and more.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90 degree weld on d-ring mount\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eCNC laser cut\u003c\/li\u003e\n\u003cli\u003e3.75 inch and 1.75 inch wide at the base (weld surface)\u003c\/li\u003e\n\u003cli\u003e1 inch hole\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271442346155,"sku":"MB2027-HJQL","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2027-HJQL.jpg?v=1792077355"},{"product_id":"motobilt-mb2026","title":"Flat 3.5 Inch Weld On D-Ring Mount Steel Motobilt","description":"\u003cp\u003eThe flat weld on d-ring mount measures 3.5 inch on the flat base. The d-ring mount is CNC Laser Cut from 3\/4 inch thick high strength steel plate. The through hole is 1 inch. The part requires welding to install. The weld on d-ring mount is perfect for adding a recovery point to bumpers, tube chassis, and more.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlat weld on d-ring mount\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eCNC laser cut\u003c\/li\u003e\n\u003cli\u003e3.5 inch wide at the base (weld surface)\u003c\/li\u003e\n\u003cli\u003e1 inch hole\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271442378923,"sku":"MB2026-HJQL","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2026-HJQL.jpg?v=1792077357"},{"product_id":"motobilt-mb3004","title":"Jeep CJ Rear Cross Member 76-86 Jeep CJ Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt rear Jeep CJ (1976-1986) cross member is a perfect solution for those wanting to replace a bent or rusted out factory rear cross member. Over the years we have seen many Jeep Wrangler CJ's needing a replacement for the rear cross member. Often times due to someone attaching a snatch strap or chain to the thin factory Jeep cross member.\u003c\/p\u003e\n\u003cp\u003eOther cases have been due to rust. Either way the Motobilt rear cross member is a great alternative to simply installing a factory cross member. The Motobilt cross member is fabricated from heavy duty 3\/16 inch steel plate. The rear cross member retains the factory bolt holes for the rear bumper and gas tank skid.\u003c\/p\u003e\n\u003cp\u003eThe cross member also provides mounting holes for the factory corner body mount bushings. The cross member ships ready to install. Installation does require welding. It is highly recommended using a professional welder for the installation. The cross member is shipped out bare steel ready to install.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ rear cross member\u003c\/li\u003e\n\u003cli\u003eFits 1976-1986 Jeep CJ\u003c\/li\u003e\n\u003cli\u003eFabricated from heavy duty 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCross member retains the factory bolt holes for the rear bumper and gas tank skid\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips ready to install\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eHighly recommended using a professional welder for the installation\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271442444459,"sku":"MB3004-HJQL","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3004-HJQL.jpg?v=1792077359"},{"product_id":"motobilt-mb3003","title":"Jeep TJ Rear Cross Member 97-06 Wrangler TJ Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt rear Jeep TJ (1997-2006) cross member is the strongest available. We base this claim because we did not simply use thicker material we also added gusseting to the cross member. The original intent was in designing a cross member for a customer who wanted to run it as a high clearance rear bumper.\u003c\/p\u003e\n\u003cp\u003eOver the years we have seen many Jeep Wrangler TJ's needing a replacement for the rear cross member. Often times due to someone attaching a snatch strap or chain to the thin factory Jeep cross member. Other cases have been due to rust. Either way the Motobilt rear cross member is a great alternative to simply installing a factory cross member. The Motobilt cross member is fabricated from heavy duty 3\/16 inch steel plate. The rear cross member retains the factory bolt holes for the rear bumper and gas tank skid.\u003c\/p\u003e\n\u003cp\u003eThe cross member also provides mounting holes for the factory corner body mount bushings. The cross member ships full welded and ready to install. Installation does require welding. It is highly recommended using a professional welder for the installation. The cross member is shipped out bare steel ready to install.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ rear cross member\u003c\/li\u003e\n\u003cli\u003eFits: 1997-2006 Jeep TJ\u003c\/li\u003e\n\u003cli\u003eFabricated from heavy duty 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCross member retains the factory bolt holes for the rear bumper and gas tank skid\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips full welded and ready to install\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eHighly recommended using a professional welder for the installation\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271442509995,"sku":"MB3003-HJQL","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3003-HJQL.jpg?v=1792077360"},{"product_id":"motobilt-mb2087","title":"Chassis Frame Fish Plate Approximately 5x 3 Inch Motobilt","description":"\u003cp\u003eThe Motobilt Chassis Frame Fish Plate is universal and can be bent or formed to whichever angle you are working with. Chassis Frame Fish Plate is CNC Laser cut out of 3\/16 inch P and O steel is approximately 5 inch x 3 inch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChassis Frame Fish Plate\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut out of 3\/16 inch P and O steel\u003c\/li\u003e\n\u003cli\u003eApproximately 5 inch x 3 inch\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271443919019,"sku":"MB2087-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2087-HJQL.jpg?v=1792077402"},{"product_id":"motobilt-mb4011","title":"Weld-In Bung Kit Motobilt","description":"\u003cp\u003eMotobilt Weld-In Bung Kit. Includes weld in bung to fit 1-3\/8 inch hole and a 3\/4 inch NPT thread fill plug. Will work on plate up to 1\/2 inch thick\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271444115627,"sku":"MB4011-HJQL","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB4011_3-HJQL.jpg?v=1792077408"},{"product_id":"motobilt-mb2000","title":"Bottle Opener Gusset 3x3 Inch Steel Motobilt","description":"\u003cp\u003eAdd style and function to your fabrication projects with the Motobilt Bottle Opener Gusset. The Motobilt Bottle Opener Gusset is CNC Laser cut from 3\/16 inch thick steel. The Bottle Opener Gusset measures 3 inches tall and 3 inches wide. The gusset can be used with many custom fabrication projects such as tube chassis, roll cages, bumpers, tables or fixtures around your shop, and more.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottle Opener Gusset\u003c\/li\u003e\n\u003cli\u003e3 inches by 3 inches\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut\u003c\/li\u003e\n\u003cli\u003eAdds function and style\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Motobilt part requires mig or tig welding for installation by an experienced welder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271444279467,"sku":"MB2000-HJQL","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2000-HJQL.jpg?v=1792077411"},{"product_id":"motobilt-mb5002","title":"Odyssey\/Diehard Platinum Battery Box 34-78 Motobilt","description":"\u003cp\u003eThe Motobilt universal fit battery box for the Odyssey and Sears Diehard Platinum Series 34-78 is built with function and strength in mind. The battery box is fabricated from 11 GA (1\/8 inch thick) steel plate. The battery box is shipped bare steel ready for you to paint or powdercoat to the color of your choice. The battery box can be bolted or welding into place where you deem suitable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOdyssey\/Diehard Platinum Battery Box 34-78\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271444705451,"sku":"MB5002-HJQL","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5002-HJQL.jpg?v=1792077420"},{"product_id":"motobilt-mb5001","title":"Optima Battery Box D34\/78 Motobilt","description":"\u003cp\u003eThe Motobilt Optima Battery Box is a simple and effective way to mount your Optima Battery in a Jeep, Truck, Hot Rod, Race Car, and more. Our design incorporates rivnuts in the base to make installing the battery and lid easier. The Motobilt fabricated Optima Battery Box was designed with function in mind. If you have ever installed a battery box in a Jeep, buggy, or hot rod you may have found some of the fasteners hard to get to. The Motobilt Optima Battery Box utilizes Rivnuts to attach the lid to the box. This is important in tight locations or in situations where you may need to remove the battery quickly by reducing the number of tools needed to complete the job.\u003c\/p\u003e\n\u003cp\u003eThe Optima Battery Box was CNC laser cut from 1\/8 inch high strength steel plate and formed on a hydraulic press brake for a precision fit. The Optima Battery Box consists of three parts including the base with the pre-installed rivnuts, the lid (top), and the bolts to secure the lid to the top. This battery box is a Universal Fit part with mounting holes in the base. What this means is you will need a secure flat surface to mount the battery box. The kit does not include bolts to secure the base. The base of the Optima Battery Box can be welded to a tube chassis or welded to a custom built pedestal.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptima battery box\u003c\/li\u003e\n\u003cli\u003eTightly fits Optima Battery\u003c\/li\u003e\n\u003cli\u003eUniversal Fit for many applications\u003c\/li\u003e\n\u003cli\u003eRivnuts pre-installed to mount lid\u003c\/li\u003e\n\u003cli\u003e1\/8 inch CNC Laser Cut Steel Plate\u003c\/li\u003e\n\u003cli\u003eMounting holes in the base\u003c\/li\u003e\n\u003cli\u003eCan be welded in place if required\u003c\/li\u003e\n\u003cli\u003eClearanced around top and side posts\u003c\/li\u003e\n\u003cli\u003eFits the Red, Yellow, and Blue Top Optima Batteries\u003c\/li\u003e\n\u003cli\u003eSize Group D34\/78\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271444738219,"sku":"MB5001-HJQL","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5001-HJQL.jpg?v=1792077420"},{"product_id":"motobilt-mb3020-s","title":"Jeep LJ Frame Back Half Kit W\/Stubby Bumper 04-06 Wrangler TJ Unlimited Motobilt","description":"\u003cp\u003eThe Motobilt Jeep LJ back half kit is the most complete on the market. This kit replaces the back section of frame rails to allow space to clear coilover shocks and increase departure angle. How does the the Jeep LJ back half kit do this? The Motobilt kit moves the frame rails from inside the wheel opening to the bottom side of the tube. In doing so the bumper location is moved up to just below the tailgate. This kit requires an experienced welder\/fabricator to install.\u003c\/p\u003e\n\u003cp\u003eBuilding custom four link suspension on a Jeep LJ does not have to be difficult. The Motobilt Jeep LJ back half kit is an effective way to gain clearance for suspension components like coilovers shocks, bypass shocks, or ORI struts. The Jeep LJ Back Half Kit moves the frame rails to the bottom side of the tube. The frame rails will mount directly to the bottom side of the rear floor board for a tight compact fit. It should be noted the kit requires cutting sheet metal on the body just below the tailgate to allow the frame rails to extend out. The bumper is then attached in this new location. The Motobilt kit comes complete with a rear bumper.\u003c\/p\u003e\n\u003cp\u003eWhat does the Motobilt Jeep LJ back half kit include? The kit includes 7 parts total in the shipment. Two lower frame rails sections and two upper frame rail sections. The installer will joint the upper and lower sections together during the mock up stage of the installation. The fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts. The kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper.\u003c\/p\u003e\n\u003cp\u003eAll of the parts of this kit other than the d-ring mounts are fabricated from 3\/16 inch high strength steel plate and formed on a press brake. Unlike some of the other kits on the market we do not require you to purchase square tubing to complete the project. With that said we provide a flat point on the back center of the rear bumper for the installer to triangulate some round tubing if required. The 3\/4 inch thick high strength steel plate d-ring mounts pass all the way through the rear bumper and weld in place on both sides for ultimate strength. The d-rings have a 1 inch hole in them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep LJ Back Half Kit with 50 inch stubby rear bumper\u003c\/li\u003e\n\u003cli\u003e3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick high strength steel plate d-ring mounts\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit includes 7 parts total in the shipment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo lower frame rails sections and two upper frame rail sections\u003c\/li\u003e\n\u003cli\u003eThe installer will joint the upper and lower sections together during the mock up stage of the installation\u003c\/li\u003e\n\u003cli\u003eThe fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eThe kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit will not work with the factory gas tank. Most people mount a fuel cell in the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThe kit will not work with the factory coil springs\u003c\/li\u003e\n\u003cli\u003eThis kit is designed for more advanced Jeep builds where suspension and driving requirements demand more space and clearance\u003c\/li\u003e\n\u003cli\u003eThis kit requires an experienced welder\/fabricator to install\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271444836523,"sku":"MB3020-S-HJQL","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3020-S-HJQL.jpg?v=1792077421"},{"product_id":"motobilt-mb3008","title":"Jeep TJ Frame Back Half Kit Motobilt","description":"\u003cp\u003eThe Motobilt Jeep TJ back half kit is the most complete on the market. This kit replaces the back section of frame rails to allow space to clear coilover shocks and increase departure angle. How does the the Jeep TJ back half kit do this? The Motobilt kit moves the frame rails from inside the wheel opening to the bottom side of the tube. In doing so the bumper location is moved up to just below the tailgate. This kit requires an experienced welder\/fabricator to install.\u003c\/p\u003e\n\u003cp\u003eBuilding custom four link suspension on a Jeep TJ does not have to be difficult. The Motobilt Jeep TJ back half kit is an effective way to gain clearance for suspension components like coilovers shocks, bypass shocks, or ORI struts. The Jeep TJ Back Half Kit moves the frame rails to the bottom side of the tube. The frame rails will mount directly to the bottom side of the rear floor board for a tight compact fit. It should be noted the kit requires cutting sheet metal on the body just below the tailgate to allow the frame rails to extend out. The bumper is then attached in this new location. The Motobilt kit comes complete with a rear bumper.\u003c\/p\u003e\n\u003cp\u003eWhat does the Motobilt Jeep TJ back half kit include? The kit includes 7 parts total in the shipment. Two lower frame rails sections and two upper frame rail sections. The installer will joint the upper and lower sections together during the mock up stage of the installation. The fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts. The kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper.\u003c\/p\u003e\n\u003cp\u003eAll of the parts of this kit other than the d-ring mounts are fabricated from 3\/16 inch high strength steel plate and formed on a press brake. Unlike some of the other kits on the market we do not require you to purchase square tubing to complete the project. With that said we provide a flat point on the back center of the rear bumper for the installer to triangulate some round tubing if required. The 3\/4 inch thick high strength steel plate d-ring mounts pass all the way through the rear bumper and weld in place on both sides for ultimate strength. The d-rings have a 1 inch hole in them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ frame back half kit\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick high strength steel plate d-ring mounts\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes 7 parts total in the shipment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo lower frame rails sections and two upper frame rail sections\u003c\/li\u003e\n\u003cli\u003eThe installer will joint the upper and lower sections together during the mock up stage of the installation\u003c\/li\u003e\n\u003cli\u003eThe fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eThe kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit will not work with the factory gas tank. Most people mount a fuel cell in the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThe kit will not work with the factory coil springs\u003c\/li\u003e\n\u003cli\u003eThis kit is designed for more advanced Jeep builds where suspension and driving requirements demand more space and clearance\u003c\/li\u003e\n\u003cli\u003eWe provide a flat point on the back center of the rear bumper for the installer to triangulate-some round tubing if required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271445524651,"sku":"MB3008-HJQL","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3008_5-HJQL.jpg?v=1792077425"},{"product_id":"motobilt-mb3001","title":"Jeep YJ Back Half Kit Motobilt","description":"\u003cp\u003eThe Motobilt Jeep YJ Back Half Kit is designed with function in mind. We may not be the cheapest but we certainly offer the best product on the market with years of experience to back up the product design. Motobilt is defined by high quality parts and design. The Motobilt Jeep YJ Back Half Kit was designed to meet a few different needs. The journey started about 15 years ago when Dan DuBose back halved his Jeep YJ to make more room for shocks and to gain ground clearance in the rear. Over the years the hand made design evolved into laser cut and formed parts. The design has been refined with specific goals in mind.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ Back Half Kit was 3D CAD designed in Solidworks for a precision fit. The parts are then CNC laser cut from 3\/16 inch thick flat steel plate, formed on a press brake, and then welded. This design and fabrication approach allows us to do things that simple box tube parts can not. The rear bumper is integrated into the design. The bumper features a very tight fitting profile with 3\/4 inch thick d-ring mounts.\u003c\/p\u003e\n\u003cp\u003eWhy installed the Motobilt Back Half Kit on your Jeep YJ? This kit provides room to mount coilover shocks and not hit the frame rails. We moved the frame rails from the factory location in the rear wheel well to under the rear floor board. This allows plenty of room to get your coilover shock angles set up correctly. Another reason is to gain about 7 inches of ground clearance in the rear bumper area.\u003c\/p\u003e\n\u003cp\u003eThis part requires extensive cutting and welding. It is recommend to have someone experienced installed this kit. It will require cutting the frame in half, cutting the body below the tailgate to allow the new frame to pass through, and welding the parts in place. Motobilt also recommends connecting your roll cage to the frame rails for added support. This kit will also require you install a fuel cell. The factory gas tank will not work with this kit.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ Back Half Kit\u003c\/li\u003e\n\u003cli\u003eFits Jeep YJ 1987-1995\u003c\/li\u003e\n\u003cli\u003eMoves frame rails under the rear floor\u003c\/li\u003e\n\u003cli\u003eImproves departure angle\u003c\/li\u003e\n\u003cli\u003eIncreases ground clearance in the rear\u003c\/li\u003e\n\u003cli\u003eIncludes a built in rear bumper\u003c\/li\u003e\n\u003cli\u003eLaser cut from 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eProvides a clean place to mount air bump stops\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis part requires extensive cutting and welding. It is recommend to have someone experienced installed this kit\u003c\/li\u003e\n\u003cli\u003eIt will require cutting the frame in half, cutting the body below the tailgate to allow the new frame to pass through, and welding the parts in place\u003c\/li\u003e\n\u003cli\u003eMotobilt also recommends connecting your roll cage to the frame rails for added support\u003c\/li\u003e\n\u003cli\u003eThis kit will also require you install a fuel cell. The factory gas tank will not work with this kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271445590187,"sku":"MB3001-HJQL","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3001-HJQL.png?v=1792077425"},{"product_id":"motobilt-mb4059","title":"Jeep JK 1 Ton Swap Truss Kit Super Duty Dana 60 Motobilt","description":"\u003cp\u003eThe Jeep JK 1 ton axle swap kit allows you to use a 2005 and up Ford Super Duty Dana 60 front axle and install it into a Jeep Wrangler JK. It consists of a truss, upper link mounts, lower link mounts, coil spring buckets, adjustable track bar mount for the axle, track bar mount for the frame, and sway bar end link mounts. The main body of the truss is made from 1\/4 inch thick steel plate that is laser cut and CNC formed in house at Motobilt. We then brace the length of the truss with 1\/4 inch beams that closely follow every contour of the axle. Another key feature that sets us apart is the integrated and low profile diff cover. This low profile cover will work with the huge steering that comes on these 1 ton axles, yet still provides you ultimate protection. With our kit there is no measuring needed. You simply bolt the diff cover up and everything will go in place like it should. Instead of using bushings in the top, we have a flexible and rebuildable johnny joint for both upper links.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK 1 ton axle swap kit\u003c\/li\u003e\n\u003cli\u003eThis kit allows you to use a 2005 and up Ford Super Duty Dana 60 front axle and install it into a Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003e1\/4 inch laser cut and cnc formed\u003c\/li\u003e\n\u003cli\u003eQuick and easy no-measure install\u003c\/li\u003e\n\u003cli\u003eLow profile steel diff cover\u003c\/li\u003e\n\u003cli\u003eTrack bar mounts for both the frame and axle\u003c\/li\u003e\n\u003cli\u003eLower control arm mounts\u003c\/li\u003e\n\u003cli\u003eUpper control arm mounts with Currie Johnny Joints.\u003c\/li\u003e\n\u003cli\u003eSway bar end link mounts\u003c\/li\u003e\n\u003cli\u003eLow profile diff cover that will clear the steering\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271447195819,"sku":"MB4059-HJQL","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB4059-HJQL.jpg?v=1792077441"},{"product_id":"motobilt-mb1522","title":"Jeep CJ Full Width Axle Conversion Kit Motobilt","description":"\u003cp\u003eThe Motobilt Jeep CJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep CJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. This kit fits Jeep CJ's from 1976 to 1986. \u003cbr\u003eMotobilt offers high quality fabricated parts for the DIY fabricator. It requires welding to install. The Motobilt Jeep CJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time. The kit features an removable winch plate, 42 inch in wide fabricated bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle hangers for the frame, and 4 inch long boomerang shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs or Jeep CJ rear springs. The front bumper features a built in bottle opener on the bottom side.\u003cbr\u003eThe bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, shackle hangers, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ full width axle conversion kit\u003c\/li\u003e\n\u003cli\u003eBumper and winch plate are fabricated from 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSide frame plate, spring buckets, shackle hangers, and shackles 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eD-ring mounts are fabricated from 3\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt can supply these parts for an additional price\u003c\/li\u003e\n\u003cli\u003eThis kit is Not a bolt on product\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271447261355,"sku":"MB1522-HJQL","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB1522-HJQL.jpg?v=1792077442"},{"product_id":"motobilt-mb1502","title":"Jeep YJ Full Width Axle Conversion Kit Motobilt","description":"\u003cp\u003eThe Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. This kit fits Jeep YJ's from 1987 to 1995. Motobilt offers high quality fabricated parts for the DIY fabricator. This kit is Not a bolt on product. It requires welding to install. The Motobilt Jeep YJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time.\u003c\/p\u003e\n\u003cp\u003ehe kit features a removable winch plate, stubby front bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle bushing tubes for the frame, and 4 inch long offset shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs. The front bumper features a built in bottle opener on the bottom side.\u003c\/p\u003e\n\u003cp\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers. This kit was designed to keep the ride height as low as possible. The rear shackle bushings will be located mid way through the frame rail. The bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ full width axle conversion kit to install Chevy Dana 44 or Dana 60 front axle\u003c\/li\u003e\n\u003cli\u003e1987-1995 Jeep YJ\u003c\/li\u003e\n\u003cli\u003e1978-1979 Ford 44 and 60 fronts\u003c\/li\u003e\n\u003cli\u003eBumper and winch plate 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eremovable winch plate\u003c\/li\u003e\n\u003cli\u003estubby front bumper assembly\u003c\/li\u003e\n\u003cli\u003eSide frame plate-spring buckets-shackles fabricated from 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch d-ring mounts that pass through the bumper and welded on both sides\u003c\/li\u003e\n\u003cli\u003eshackle reversal spring buckets\u003c\/li\u003e\n\u003cli\u003eshackle bushing tubes for the frame\u003c\/li\u003e\n\u003cli\u003e4 inch long offset shackles\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is Not a bolt on product. Welding required to install.\u003c\/li\u003e\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt can supply these parts for an additional price.\u003c\/li\u003e\n\u003cli\u003eThe front bumper features a built in bottle opener on the bottom side\u003c\/li\u003e\n\u003cli\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271447425195,"sku":"MB1502-HJQL","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB1502-HJQL.jpg?v=1792077445"},{"product_id":"motobilt-mb3025","title":"Jeep JK \u0026 JKU Back Half Kit 07-18 Wrangler JK Motobilt","description":"\u003cp\u003eThis cutting edge design is the first of its kind for the Jeep JK. The kit replaces the entire back half of the frame from below the doors to the rear bumper. The Motobilt Jeep JK back half kit was 3 D cad designed by our legendary team of experts. The three main factors considered in the design were room for coil over shocks, a rear mounted fuel cell, and the ability to mount a true 4 link suspension.\u003cbr\u003e\u003cstrong\u003eThe kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePassenger side frame rails. 2 pcs\u003c\/li\u003e\n\u003cli\u003eDriver side frame rails. 2 pcs\u003c\/li\u003e\n\u003cli\u003eFrame rail connecting plates 2 pcs\u003c\/li\u003e\n\u003cli\u003eRear cross member 1 pcs\u003c\/li\u003e\n\u003cli\u003eFrame chop rear bumper 1 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with both the 2 door JK or the 4 door JKU\u003c\/li\u003e\n\u003cli\u003eFrame rails above axle center line are moved inwards 5 inches per side allowing room for coil overs.\u003c\/li\u003e\n\u003cli\u003eRoom for single or dual shocks.\u003c\/li\u003e\n\u003cli\u003eMain frame rails include 2 new body mounts that are matched to the OEM specifications for precision.\u003c\/li\u003e\n\u003cli\u003eTwo of the factory body mounts over the axle are removed.\u003c\/li\u003e\n\u003cli\u003e4 frame cross members are removed allowing room for more axle travel upward. This allows a lower center of gravity.\u003c\/li\u003e\n\u003cli\u003eThe new 3\/16 inch thick steel frame rails provide a much stronger mounting point for link mounts then the thin weak factory frame rails.\u003c\/li\u003e\n\u003cli\u003eAn optional cross member to mount 4 link mounts will be available soon.\u003c\/li\u003e\n\u003cli\u003eAn optional aluminum fuel cell with 3\/16 inch thick steel plate skid plate will be available soon. An OEM sending unit will be compatible with the new cell.\u003c\/li\u003e\n\u003cli\u003ePrecise easy to locate points for cutting the factory frame rails are provided and alignment holes are in place to make the install fool proof.\u003c\/li\u003e\n\u003cli\u003eThe install requires the frame to be cut with a saw and not a torch. This makes for a clean, quick, and precise install.\u003c\/li\u003e\n\u003cli\u003eThe rear frame rails are shortened 2.5 inches over stock and moved up 1 1\/8 inches.\u003c\/li\u003e\n\u003cli\u003eWill work with Antirock sway bar kit for JK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour stock exhaust will have to be modified\u003c\/li\u003e\n\u003cli\u003eRequires cutting and welding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271448506539,"sku":"MB3025-HJQL","price":1709.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB3025-HJQL.jpg?v=1792077470"},{"product_id":"motobilt-mb5010-tj-3010-5007","title":"Jeep TJ\/LJ Aluminum Fuel Cell 19 Gallon Package 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eMotobilt MB5010-TJ-3000-5007 offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount and fuel pump claming ring are included.\u003c\/p\u003e\n\u003cp\u003eThe mount consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt tank features one fitting on top of the with a 90 degree roll over valve and barbed hose fitting.  A 2nd -8 AN fitting has been added for the 2005-2006 models as they require a return line. Older model TJ's will simply cap this fitting off as its not needed on the early models.The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep TJ\u003c\/li\u003e\n\u003cli\u003eSteel mount\u003c\/li\u003e\n\u003cli\u003eFuel pump clamping ring\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271448965291,"sku":"MB5010-TJ-3010-5007-HJQL","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5010-TJ-3010-5007-HJQL_ffdb4c48-1213-4257-8a40-aa9b323b5cbc.jpg?v=1792077480"},{"product_id":"motobilt-mb5010-3an-3010","title":"Fuel Cell 19 Gallon With Mount Motobilt","description":"\u003cp\u003eMotobilt offers a solution for relocating the fuel tank in your Jeep or buggy. The Motobilt MB5010-3AN with mount was designed to fit in the back bed of your Jeep, truck or buggy. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt tank features 2 number 8 -AN fittings on top of the tank which are tig welded into place. A 3rd 90 degree brass roll over valve with barbed hose fitting is installed for the vent line . The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount MB3010 is included\u003c\/p\u003e\n\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-3AN Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep, truck, or buggy\u003c\/li\u003e\n\u003cli\u003e2 number 8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\n\u003cli\u003e1 90 degree brass roll over valve with barbed hose fitting for vent line\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eMount Included\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eFuel mount MB3010 included\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271448998059,"sku":"MB5010-3AN-3010-HJQL","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5010-3AN-3010-HJQL.jpg?v=1792077481"},{"product_id":"motobilt-mb5005-tj-3000-5007","title":"Jeep TJ\/LJ Aluminum Fuel Cell 15 Gallon Package 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eThe Motobilt Jeep TJ\/LJ fuel cell package was designed to mount in the bed of your Jeep TJ or LJ. It will use your factory Jeep TJ or LJ fuel pump and is made out of 1\/8 inch aluminum that is TIG welded. Motobilt offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5005-TJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 inch x 12 inch x 9 inch and can fit behind your seat if you choose too. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt MB3000 fuel cell mount and MB5007 fuel pump clamping ring are included.\u003c\/p\u003e\n\u003cp\u003eThe mount consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5005-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary!\u003c\/p\u003e\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearace.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ\/LJ aluminum fuel cell\u003c\/li\u003e\n\u003cli\u003eMB3000 Fuel Cell Mount\u003c\/li\u003e\n\u003cli\u003eMB50007 TJ fuel pump clamping ring\u003c\/li\u003e\n\u003cli\u003e30 inch x 12 inch x 9 inch\u003c\/li\u003e\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271449096363,"sku":"MB5005-TJ-3000-5007-HJQL","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5005-TJ-3000-5007-HJQL.jpg?v=1792077482"},{"product_id":"motobilt-mb5005-3an-3000","title":"Fuel Cell 15 Gallon With Mount Motobilt","description":"\u003cp\u003eThe Motobilt 15 Gallon Fuel Cell with mount is a tank that utilizes an external fuel pump. Motobilt offers a solution for relocating the fuel tank in your vehicle. The Motobilt MB5005-3AN was designed to fit in the back bed of your Jeep, truck, or buggy. It is 30 inch x 12 inch x 9 inch and can fit behind your seat if you choose too. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The included Motobilt MB3000 fuel cell mount will fit this tank perfectly. The kit consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount.\u003c\/p\u003e\n\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features 2 number 8 -AN fittings on top of the tank which are tig welded into place and 1 brass roll over valve. The fittings are for Vent line with an included roll over valve pre-installed inside the tank. Fuel pick up with hose and mount inside the tank. A return line fitting. This fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 Gallon Fuel Cell\u003c\/li\u003e\n\u003cli\u003e30 inch x 12 inch x 9 inch\u003c\/li\u003e\n\u003cli\u003eSteel dimple die mount\u003c\/li\u003e\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003e2 number8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\n\u003cli\u003e1 90 degree brass roll over valve for vent with barbed hose fitting\u003c\/li\u003e\n\u003cli\u003eFuel cell mount with dimple dies available\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eMount included\u003c\/li\u003e\n\u003cli\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271449129131,"sku":"MB5005-3AN-3000-HJQL","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB5005-3AN-3000-HJQL.jpg?v=1792077482"},{"product_id":"motobilt-mb2123-001","title":"Trick Tab with 0.28 Inch Hole 10 Pack Motobilt","description":"\u003cp\u003eDesigned for the home or professional builder, the Motobilt MB2123-001 Trick Tabs are constructed of 1\/8 inch thick (11 Ga) laser cut steel that is CNC precision press brake formed.\u003c\/p\u003e\n\u003cp\u003eThe hole diameter measures 0.28 inch i.d. to easily fit 1\/4 inch standard bolts, as well as M6 and M7 metric bolts.\u003cbr\u003eThe double formed flanges of the Trick Tab are designed to add strength and to fit the outside profile of a round tube. This Trick Tab will fit the outside shape of 1.50 inch, 1.75 and 2.00 inch o.d. round tube.\u003c\/p\u003e\n\u003cp\u003eThese tabs are commonly used for tubular frame vehicles and roll cages to quickly create a bolting point for body or dash panel mounting, accessory mounting, inner fender mounts, light mounts or many other useful purposes.\u003c\/p\u003e\n\u003cp\u003eWe've designed these Trick Tabs as a bank of 10 pieces that are lightly stitched together. When you need to use a tab, you simply break off a tab and weld it on to your tube.\u003c\/p\u003e\n\u003cp\u003eThese banks of ten (10) tabs are easy to store in your toolbox or on a pegboard hook and also stack well on a shelf. Keep your shop stocked up on these handy builder tabs!\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271451259051,"sku":"MB2123-001-HJQL","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2123-001_2-HJQL.jpg?v=1792077529"},{"product_id":"motobilt-mb2123-002r","title":"Trick Tab with 1\/4 Inch 20 Rivnuts 10 Pack Motobilt","description":"\u003cp\u003eDesigned for the home or professional builder, the Motobilt MB2123-003 Trick Tabs are constructed of 1\/8 inch thick (11 Ga) laser cut steel that is CNC precision press brake formed.\u003c\/p\u003e\n\u003cp\u003eThe tab comes with preinstalled rivnuts to accept 1\/4 Inch 20 bolts. The addition of the rivnut is helpful when it is hard to access the backside of the tab in inaccessible areas, like a body or dash panel.\u003c\/p\u003e\n\u003cp\u003eThe double formed flanges of the Trick Tab are designed to add strength and to fit the outside profile of a round tube. This Trick Tab will fit the outside shape of 1.50 Inch, 1.75 inch 2.00 inch o.d. round tube.\u003c\/p\u003e\n\u003cp\u003eThese tabs are commonly used for tubular frame vehicles and roll cages to quickly create a bolting point for body or dash panel mounting, accessory mounting, inner fender mounts, light mounts or many other useful purposes.\u003c\/p\u003e\n\u003cp\u003eWe've designed these Trick Tabs as a bank of 10 pieces that are lightly stitched together. When you need to use a tab, you simply break off a tab and weld it on to your tube.\u003c\/p\u003e\n\u003cp\u003eThese banks of ten (10) tabs are easy to store in your toolbox or on a pegboard hook and also stack well on a shelf. Keep your shop stocked up on these handy builder tabs!\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":48271451291819,"sku":"MB2123-002R-HJQL","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/files\/MB2123-002R-HJQL.jpg?v=1792077530"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0245\/1731\/2593\/collections\/MB1502-S-HJQL_d1311d18-621e-48e8-9226-06f5d61953b4.jpg?v=1793763300","url":"https:\/\/dev-arw-off-road.myshopify.com\/collections\/fabrication.oembed","provider":"ARW Offroad","version":"1.0","type":"link"}