EVO Enforcer Gas Lift Kits – 2018–2026 Jeep Wrangler JL

2.5 Inch · Stage 1 · No shocks or adjustable track bars · Shipping weight 55 lb across 3 documented boxes. Gas 3.6L/2.0L JL/JLU only, not diesel, 392 or 4xe.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2.0/2.5 inch lift shocks.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport models for the 2.5-inch lift; actual clearance is not guaranteed and may require trimming or other build-specific changes.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base suspension components for a 2.5-inch lift; shocks and adjustable track bars are not included.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
Features:

• JL 2.5 Inch Enforcer Lift Stage 1
• Installation Time: 3.0-5.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 1
• Hardware Included: Yes
• Sold As: Kit

2.5 Inch · Stage 2 · No shocks or adjustable track bars · Shipping weight 82 lb across 4 documented boxes. Gas 3.6L/2.0L JL/JLU only, not diesel, 392 or 4xe.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2.0/2.5 inch lift shocks.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport models for the 2.5-inch lift; actual clearance is not guaranteed and may require trimming or other build-specific changes.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base suspension components for a 2.5-inch lift; shocks and adjustable track bars are not included.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
Features:

• JL 2.5 Inch Enforcer Lift Stage 2
• Installation Time: 3.0-5.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 2
• Hardware Included: Yes
• Sold As: Kit

2.5 Inch · Stage 3 · No shocks or adjustable track bars · Shipping weight 98 lb across 5 documented boxes. Gas 3.6L/2.0L JL/JLU only, not diesel, 392 or 4xe.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2.0/2.5 inch lift shocks.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport models for the 2.5-inch lift; actual clearance is not guaranteed and may require trimming or other build-specific changes.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base suspension components for a 2.5-inch lift; shocks and adjustable track bars are not included.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
Features:

• JL 2.5 Inch Enforcer Lift Stage 3
• Installation Time: 5.0-7.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 3
• Hardware Included: Yes
• Sold As: Kit

2.5 Inch · Stage 4 · No shocks or adjustable track bars · Shipping weight 136 lb across 7 documented boxes. Gas 3.6L/2.0L JL/JLU only, not diesel, 392 or 4xe.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2.0/2.5 inch lift shocks.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport models for the 2.5-inch lift; actual clearance is not guaranteed and may require trimming or other build-specific changes.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base suspension components for a 2.5-inch lift; shocks and adjustable track bars are not included.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
Features:

• JL 2.5 Inch Enforcer Lift Stage 4
• Installation Time: 6.0-8.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 4
• Hardware Included: Yes
• Sold As: Kit

3.5 Inch · Stage 3 · No shocks or adjustable track bars · Shipping weight 105 lb across 5 documented boxes. Gas 3.6L/2.0L JL/JLU only, not diesel, 392 or 4xe.

The EVO MFG 3.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 3.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift.

The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 3–5-inch-lift shocks, subject to actual compressed and extended travel or use of our EVO SPEC 2.5 inch Remote Reservoir King Shocks.

These kits come with a set of 3.5 inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 3.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill).

They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation. 3.5 inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Stage 1 kits includes the base suspension components for a 3.5-inch lift; shocks and adjustable track bars are not included.

Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 kits include stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

Stage 4 kits include stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

Note: All part number EXT kits include front and rear shock extensions.

Note: K Kits include EVO SPEC King Shocks.

Factory-shock retention requires a compatible extension setup; these no-shock base selections do not include extensions.

Note: Depending on actual tire variances and sizes, Some trimming of body sheet metal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.
Features:

• JL 3.5 Inch Enforcer Lift Stage 3
• Installation Time: 5.0-7.0 Hours
• Lift Height: 3.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 3
• Hardware Included: Yes
• Sold As: Kit

3.5 Inch · Stage 4 · No shocks or adjustable track bars · Shipping weight 143 lb across 7 documented boxes. Gas 3.6L/2.0L JL/JLU only, not diesel, 392 or 4xe.

The EVO MFG 3.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 3.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift.

The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 3–5-inch-lift shocks, subject to actual compressed and extended travel or use of our EVO SPEC 2.5 inch Remote Reservoir King Shocks.

These kits come with a set of 3.5 inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 3.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill).

They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation. 3.5 inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Stage 1 kits includes the base suspension components for a 3.5-inch lift; shocks and adjustable track bars are not included.

Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 kits include stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

Stage 4 kits include stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

Note: All part number EXT kits include front and rear shock extensions.

Note: K Kits include EVO SPEC King Shocks.

Factory-shock retention requires a compatible extension setup; these no-shock base selections do not include extensions.

Note: Depending on actual tire variances and sizes, Some trimming of body sheet metal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.
Features:

• JL 3.5 Inch Enforcer Lift Stage 4
• Installation Time: 6.0-8.0 Hours
• Lift Height: 3.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 4
• Hardware Included: Yes
• Sold As: Kit

2.5 Inch · Stage 1 · Supplied King 2.5 shocks; no adjustable track bars. Gas 3.6L/2.0L JL/JLU, 2018–2026, not diesel/392/4xe. Shipping weight 118 lb across 5 boxes.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

This selected K package includes the front and rear EVO SPEC King 2.5-inch-diameter shocks: front remote reservoirs and rear piggyback reservoirs. These are two axle-position pairs, four shocks total, not an additional purchase. This is not the separate KA compression-adjuster package. Do not buy duplicate shocks or factory-shock EXT adapters for this supplied King package.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general 2.5-inch-lift guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport; actual wheel, tire and body clearance must be checked and trimming may be needed.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base components for the selected 2.5-inch lift.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

All part number EXT kits include front and rear shock extensions.
Features:

• JL 2.5 Inch Enforcer Lift Stage 1 with EVO SPEC King 2.5 Shocks
• Installation Time: 4.0-6.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 1
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2.5 Inch · Stage 2 · Supplied King 2.5 shocks; no adjustable track bars. Gas 3.6L/2.0L JL/JLU, 2018–2026, not diesel/392/4xe. Shipping weight 145 lb across 6 boxes.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

This selected K package includes the front and rear EVO SPEC King 2.5-inch-diameter shocks: front remote reservoirs and rear piggyback reservoirs. These are two axle-position pairs, four shocks total, not an additional purchase. This is not the separate KA compression-adjuster package. Do not buy duplicate shocks or factory-shock EXT adapters for this supplied King package.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general 2.5-inch-lift guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport; actual wheel, tire and body clearance must be checked and trimming may be needed.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base components for the selected 2.5-inch lift.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

All part number EXT kits include front and rear shock extensions.
Features:

• JL 2.5 Inch Enforcer Lift Stage 2 with EVO SPEC King 2.5 Shocks
• Installation Time: 5.0-7.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 2
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2.5 Inch · Stage 3 · Supplied King 2.5 shocks; no adjustable track bars. Gas 3.6L/2.0L JL/JLU, 2018–2026, not diesel/392/4xe. Shipping weight 161 lb across 7 boxes.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

This selected K package includes the front and rear EVO SPEC King 2.5-inch-diameter shocks: front remote reservoirs and rear piggyback reservoirs. These are two axle-position pairs, four shocks total, not an additional purchase. This is not the separate KA compression-adjuster package. Do not buy duplicate shocks or factory-shock EXT adapters for this supplied King package.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general 2.5-inch-lift guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport; actual wheel, tire and body clearance must be checked and trimming may be needed.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base components for the selected 2.5-inch lift.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

All part number EXT kits include front and rear shock extensions.
Features:

• JL 2.5 Inch Enforcer Lift Stage 3 with EVO SPEC King 2.5 Shocks
• Installation Time: 6.0-8.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 3
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2.5 Inch · Stage 4 · Supplied King 2.5 shocks; no adjustable track bars. Gas 3.6L/2.0L JL/JLU, 2018–2026, not diesel/392/4xe. Shipping weight 199 lb across 9 boxes.

The EVO MFG 2.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.

This selected K package includes the front and rear EVO SPEC King 2.5-inch-diameter shocks: front remote reservoirs and rear piggyback reservoirs. These are two axle-position pairs, four shocks total, not an additional purchase. This is not the separate KA compression-adjuster package. Do not buy duplicate shocks or factory-shock EXT adapters for this supplied King package.

These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. EVO gives general 2.5-inch-lift guidance of up to 37-inch tires on Rubicon or 35-inch tires on Sahara/Sport; actual wheel, tire and body clearance must be checked and trimming may be needed.

The EVO MFG 2.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.

Stage 1 kits includes the base components for the selected 2.5-inch lift.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

All part number EXT kits include front and rear shock extensions.
Features:

• JL 2.5 Inch Enforcer Lift Stage 4 with EVO SPEC King 2.5 Shocks
• Installation Time: 7.0-9.0 Hours
• Lift Height: 2.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 4
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

3.5 Inch · Stage 3 · Supplied King 2.5 shocks; no adjustable track bars. Gas 3.6L/2.0L JL/JLU, 2018–2026, not diesel/392/4xe. Shipping weight 168 lb across 7 boxes.

The EVO MFG 3.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 3.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift.

This selected K package includes the front and rear EVO SPEC King 2.5-inch-diameter shocks: front remote reservoirs and rear piggyback reservoirs. These are two axle-position pairs, four shocks total, not an additional purchase. This is not the separate KA compression-adjuster package. Do not buy duplicate shocks or factory-shock EXT adapters for this supplied King package.

These kits come with a set of 3.5 inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 3.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill).

They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation. 3.5 inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Stage 1 kits includes the base components for the selected 3.5-inch lift.

Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 kits include stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

Stage 4 kits include stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

Note: All part number EXT kits include front and rear shock extensions.

Note: K Kits include EVO SPEC King Shocks.

Note:

Note: Depending on actual tire variances and sizes, Some trimming of body sheet metal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.
Features:

• JL 3.5 Inch Enforcer Lift Stage 3 with EVO SPEC King 2.5-inch-diameter Shocks
• Installation Time: 6.0-8.0 Hours
• Lift Height: 3.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 3
• Hardware Included: Yes
• Sold As: Kit

3.5 Inch · Stage 4 · Supplied King 2.5 shocks; no adjustable track bars. Gas 3.6L/2.0L JL/JLU, 2018–2026, not diesel/392/4xe. Shipping weight 206 lb across 9 boxes.

The EVO MFG 3.5 inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 3.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift.

This selected K package includes the front and rear EVO SPEC King 2.5-inch-diameter shocks: front remote reservoirs and rear piggyback reservoirs. These are two axle-position pairs, four shocks total, not an additional purchase. This is not the separate KA compression-adjuster package. Do not buy duplicate shocks or factory-shock EXT adapters for this supplied King package.

These kits come with a set of 3.5 inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 3.5 inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill).

They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation. 3.5 inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Stage 1 kits includes the base components for the selected 3.5-inch lift.

Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 kits include stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

Stage 4 kits include stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

Note: All part number EXT kits include front and rear shock extensions.

Note: K Kits include EVO SPEC King Shocks.

Note:

Note: Depending on actual tire variances and sizes, Some trimming of body sheet metal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.
Features:

• JL 3.5 Inch Enforcer Lift Stage 4 with EVO SPEC King 2.5-inch-diameter Shocks
• Installation Time: 7.0-9.0 Hours
• Lift Height: 3.5 Inch
• Series: Enforcer
• Mount Style: Bolt On
• Stage: Stage 4
• Hardware Included: Yes
• Sold As: Kit

2018–2026 gas 3.6L/2.0L Wrangler JL/JLU, two or four doors, not diesel/392/4xe. Stage 3 · 4.5-inch nominal lift · NO shocks · NO adjustable track bars. Shipping 107 lb across 5 documented boxes.

BOTH FRONT AND REAR adjustable bars are required separately. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately.

The EVO MFG 4.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 4.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5 Inch lift shocks or use of our EVO SPEC 2.5 Inch Remote Reservoir King Shocks.

These kits come with a set of 4.5 Inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 4.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow each included bracket and component installation procedure; optional shock extensions are not included, and a bolt-on system is not a promise that every installation requires no drilling or trimming. EVO states that its packaged-shock combinations do not require driveshaft replacement; independently selected longer-travel shocks and other modifications require their own clearance review. Simple Bolt on installation.

4.5 Inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Front lower and rear upper adjustable control-arm pairs are included. This exact selection includes NO shocks and NO EXT shock adapters. Choose travel-compatible shocks for the actual vehicle; do not assume factory shocks retain full travel. These standard Enforcer kits do NOT include the Overland front geometry-drop brackets.

Note: Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing. BOTH FRONT AND REAR adjustable track bars are REQUIRED and are NOT included with this selected SKU. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately. Plus packages are separate configurations.
Features:

• Jeep Wrangler JL 4.5 Inch Enforcer Lift Stage 3
• Stage: Stage 3
• Series: Enforcer
• Lift Height: 4.5 Inch
• Hardware Included: Yes
• Includes Shocks: No
• Sold As: Kit

2018–2026 gas 3.6L/2.0L Wrangler JL/JLU, two or four doors, not diesel/392/4xe. Stage 3 · 4.5-inch nominal lift · King 2.5 shocks included · NO adjustable track bars. Shipping 170 lb across 7 documented boxes.

BOTH FRONT AND REAR adjustable bars are required separately. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately.

The EVO MFG 4.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 4.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5 Inch lift shocks or use of our EVO SPEC 2.5 Inch Remote Reservoir King Shocks.

These kits come with a set of 4.5 Inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 4.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow each included bracket and component installation procedure; optional shock extensions are not included, and a bolt-on system is not a promise that every installation requires no drilling or trimming. EVO states that its packaged-shock combinations do not require driveshaft replacement; independently selected longer-travel shocks and other modifications require their own clearance review. Simple Bolt on installation.

4.5 Inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Front lower and rear upper adjustable control-arm pairs are included. This exact K selection includes FOUR EVO SPEC King 2.5-inch-diameter shocks, front remote-reservoir and rear piggyback pairs, not KA compression adjusters. Do not buy duplicate shocks or EXT adapters. These standard Enforcer kits do NOT include the Overland front geometry-drop brackets.

Note: Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing. BOTH FRONT AND REAR adjustable track bars are REQUIRED and are NOT included with this selected SKU. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately. Plus packages are separate configurations.
Features:

• Jeep Wrangler JL 4.5 Inch Enforcer Lift Stage 3 with EVO SPEC King 2.5 Shocks
• Stage: Stage 3
• Series: Enforcer
• Lift Height: 4.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes, four King 2.5 shocks
• Sold As: Kit

2018–2024 gas 3.6L/2.0L Wrangler JL/JLU, two or four doors, not diesel/392/4xe. Stage 4 · 4.5-inch nominal lift · NO shocks · NO adjustable track bars. This NO-SHOCK Stage 4 selection is limited to2018–2024, NOT2025/2026. Shipping 145 lb across 7 documented boxes.

BOTH FRONT AND REAR adjustable bars are required separately. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately.

The EVO MFG 4.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2024 Jeep Wrangler JL 4.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5 Inch lift shocks or use of our EVO SPEC 2.5 Inch Remote Reservoir King Shocks.

These kits come with a set of 4.5 Inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 4.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow each included bracket and component installation procedure; optional shock extensions are not included, and a bolt-on system is not a promise that every installation requires no drilling or trimming. EVO states that its packaged-shock combinations do not require driveshaft replacement; independently selected longer-travel shocks and other modifications require their own clearance review. Simple Bolt on installation.

4.5 Inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

ALL EIGHT adjustable control arms are included, not duplicate lower-stage sets. This exact selection includes NO shocks and NO EXT shock adapters. Choose travel-compatible shocks for the actual vehicle; do not assume factory shocks retain full travel. These standard Enforcer kits do NOT include the Overland front geometry-drop brackets.

Note: Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing. BOTH FRONT AND REAR adjustable track bars are REQUIRED and are NOT included with this selected SKU. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately. Plus packages are separate configurations.
Features:

• Jeep Wrangler JL 4.5 Inch Enforcer Lift Stage 4
• Stage: Stage 4
• Series: Enforcer
• Lift Height: 4.5 Inch
• Hardware Included: Yes
• Includes Shocks: No
• Sold As: Kit

2018–2026 gas 3.6L/2.0L Wrangler JL/JLU, two or four doors, not diesel/392/4xe. Stage 4 · 4.5-inch nominal lift · King 2.5 shocks included · NO adjustable track bars. Shipping 208 lb across 9 documented boxes.

BOTH FRONT AND REAR adjustable bars are required separately. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately.

The EVO MFG 4.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 4.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5 Inch lift shocks or use of our EVO SPEC 2.5 Inch Remote Reservoir King Shocks.

These kits come with a set of 4.5 Inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 4.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow each included bracket and component installation procedure; optional shock extensions are not included, and a bolt-on system is not a promise that every installation requires no drilling or trimming. EVO states that its packaged-shock combinations do not require driveshaft replacement; independently selected longer-travel shocks and other modifications require their own clearance review. Simple Bolt on installation.

4.5 Inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

ALL EIGHT adjustable control arms are included, not duplicate lower-stage sets. This exact K selection includes FOUR EVO SPEC King 2.5-inch-diameter shocks, front remote-reservoir and rear piggyback pairs, not KA compression adjusters. Do not buy duplicate shocks or EXT adapters. These standard Enforcer kits do NOT include the Overland front geometry-drop brackets.

Note: Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing. BOTH FRONT AND REAR adjustable track bars are REQUIRED and are NOT included with this selected SKU. Front adjustable track bar EVO-3047B is sold separately. JL rear adjustable track bar EVO-3048B is sold separately. Plus packages are separate configurations.
Features:

• Jeep Wrangler JL 4.5 Inch Enforcer Lift Stage 4 with EVO SPEC King 2.5 Shocks
• Stage: Stage 4
• Series: Enforcer
• Lift Height: 4.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes, four King 2.5 shocks
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 2.5 Inch · Stage 1 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. No adjustable control arms are included. NO shocks or EXT shock adapters included. Choose appropriately travel-matched shocks OR compatible extensions for retained factory shocks, separately; do not assume factory shocks retain full travel. Standard Enforcer does NOT include Overland front drop brackets. Shipping 84lb across 5 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 2.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 Inch lift shocks.

These kits come with a set of 2.5 Inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37 Inch tires on Rubicon Model JLs or 35 Inch tires on Sahara and Sport/S.

The EVO MFG 2.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation. 2.5 Inch lift is based on increase of a 4 Door Rubicon.

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Stage 1 kits Includes all the necessary parts to lift your JL 2.5 inches. All part number EXT kits include front and rear shock extensions.

Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 2.5 Inch Enforcer Lift Stage 1 Plus
• Stage: Stage 1
• Series: Enforcer
• Lift Height: 2.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 2.5 Inch · Stage 1 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. No adjustable control arms are included. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters. Standard Enforcer does NOT include Overland front drop brackets. Shipping 147lb across 7 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 2.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 Inch lift shocks.

These kits come with a set of 2.5 Inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37 Inch tires on Rubicon Model JLs or 35 Inch tires on Sahara and Sport/S.

The EVO MFG 2.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation. 2.5 Inch lift is based on increase of a 4 Door Rubicon.

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Stage 1 kits Includes all the necessary parts to lift your JL 2.5 inches. All part number EXT kits include front and rear shock extensions.

Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 2.5 Inch Enforcer Lift Stage 1 Plus with EVO SPEC King 2.5 Shocks
• Stage: Stage 1
• Series: Enforcer
• Lift Height: 2.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 2.5 Inch · Stage 2 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. Includes the FRONT LOWER adjustable control-arm pair. NO shocks or EXT shock adapters included. Choose appropriately travel-matched shocks OR compatible extensions for retained factory shocks, separately; do not assume factory shocks retain full travel. Standard Enforcer does NOT include Overland front drop brackets. Shipping 111lb across 6 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 2.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 Inch lift shocks.

These kits come with a set of 2.5 Inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37 Inch tires on Rubicon Model JLs or 35 Inch tires on Sahara and Sport/S.

The EVO MFG 2.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation. 2.5 Inch lift is based on increase of a 4 Door Rubicon.

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Stage 2 kits Includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments. All part number EXT kits include front and rear shock extensions.

Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 2.5 Inch Enforcer Lift Stage 2 Plus
• Stage: Stage 2
• Series: Enforcer
• Lift Height: 2.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 2.5 Inch · Stage 2 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. Includes the FRONT LOWER adjustable control-arm pair. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters. Standard Enforcer does NOT include Overland front drop brackets. Shipping 174lb across 8 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 2.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 Inch lift shocks.

These kits come with a set of 2.5 Inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37 Inch tires on Rubicon Model JLs or 35 Inch tires on Sahara and Sport/S.

The EVO MFG 2.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation. 2.5 Inch lift is based on increase of a 4 Door Rubicon.

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Stage 2 kits Includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments. All part number EXT kits include front and rear shock extensions.

Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 2.5 Inch Enforcer Lift Stage 2 Plus with EVO SPEC King 2.5 Shocks
• Stage: Stage 2
• Series: Enforcer
• Lift Height: 2.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes, four King 2.5 shocks
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 2.5 Inch · Stage 3 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. Includes FRONT LOWER and REAR UPPER adjustable control-arm pairs. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters. Standard Enforcer does NOT include Overland front drop brackets. Shipping 190lb across 9 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 2.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 Inch lift shocks.

These kits come with a set of 2.5 Inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37 Inch tires on Rubicon Model JLs or 35 Inch tires on Sahara and Sport/S.

The EVO MFG 2.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation. 2.5 Inch lift is based on increase of a 4 Door Rubicon.

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Stage 3 Kits Includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment. All part number EXT kits include front and rear shock extensions.

Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 2.5 Inch Enforcer Lift Stage 3 Plus with EVO SPEC King 2.5 Shocks
• Stage: Stage 3
• Series: Enforcer
• Lift Height: 2.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes, four King 2.5 shocks
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 2.5 Inch · Stage 4 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. Includes ALL EIGHT adjustable control arms, not duplicate lower-stage sets. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters. Standard Enforcer does NOT include Overland front drop brackets. Shipping 228lb across 11 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 2.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 2.5 inches. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 Inch lift shocks.

These kits come with a set of 2.5 Inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37 Inch tires on Rubicon Model JLs or 35 Inch tires on Sahara and Sport/S.

The EVO MFG 2.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation. 2.5 Inch lift is based on increase of a 4 Door Rubicon.

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Stage 4 kits Includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments. All part number EXT kits include front and rear shock extensions.

Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 2.5 Inch Enforcer Lift Stage 4 Plus with EVO SPEC King 2.5 Shocks
• Stage: Stage 4
• Series: Enforcer
• Lift Height: 2.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 4.5 Inch · Stage 3 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. Includes FRONT LOWER and REAR UPPER adjustable control-arm pairs. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters. Standard Enforcer does NOT include Overland front drop brackets. Shipping 199lb across 9 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 4.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 4.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5 Inch lift shocks or use of our EVO SPEC 2.5 Inch Remote Reservoir King Shocks.

These kits come with a set of 4.5 Inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 4.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation.

4.5 Inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Includes FRONT LOWER and REAR UPPER adjustable control-arm pairs. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters.

Note: Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 4.5 Inch Enforcer Lift Stage 3 Plus with EVO SPEC King 2.5 Shocks
• Stage: Stage 3
• Series: Enforcer
• Lift Height: 4.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes, four King 2.5 shocks
• Sold As: Kit

2018–2026 Wrangler JL/JLU gas3.6L/2.0L, two or four doors, not diesel/392/4xe. 4.5 Inch · Stage 4 · STANDARD ENFORCER PLUS. BOTH FRONT AND REAR ADJUSTABLE TRACK BARS ARE INCLUDED. Includes ALL EIGHT adjustable control arms, not duplicate lower-stage sets. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters. Standard Enforcer does NOT include Overland front drop brackets. Shipping 237lb across 11 documented boxes.

Do not purchase another set of adjustable track bars for this Plus selection. Check actual wheel backspacing or existing spacers, axle centering, bump stops, tire/body clearance and suspension travel. Lift is nominal relative to a four-door Rubicon and varies with vehicle/weight. Supplier photos identify the selected package but are not a dimensional spring or shock specification.

The EVO MFG 4.5 Inch JL Enforcer Lift Suspension Systems lift your 2018–2026 Jeep Wrangler JL 4.5 inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5 Inch lift shocks or use of our EVO SPEC 2.5 Inch Remote Reservoir King Shocks.

These kits come with a set of 4.5 Inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 4.5 Inch JL Enforcer Kits are easy to install using normal tools. Follow the exact included bracket/component instructions; optional extensions are not supplied and an installation is not guaranteed to require no drilling or trimming. EVO states its packaged-shock combinations do not require driveshaft replacement; independent longer-travel shock choices or other modified builds require their own clearance review. Simple Bolt on installation.

4.5 Inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Includes ALL EIGHT adjustable control arms, not duplicate lower-stage sets. Includes FOUR EVO SPEC King 2.5-inch-diameter shocks: front remote-reservoir and rear piggyback pairs. This is not a KA compression-adjuster or King2.0 package. Do not buy duplicate shocks or EXT adapters.

Note: Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with Plus kits.
Features:

• Jeep Wrangler JL 4.5 Inch Enforcer Lift Stage 4 Plus with EVO SPEC King 2.5 Shocks
• Stage: Stage 4
• Series: Enforcer
• Lift Height: 4.5 Inch
• Hardware Included: Yes
• Includes Shocks: Yes, four King 2.5 shocks
• Sold As: Kit

EVO-3013S3PK · 3.5 Inch · Stage 3 PLUS · 2018–2026 Wrangler JL/JLU GAS3.6L/2.0L, two or four doors. Not diesel,392 or4xe. Includes FOUR EVO SPEC King2.5-inch-diameter shocks, front remote-reservoir and rear piggyback pairs, plus BOTH FRONT AND REAR adjustable track bars. This is not a KA compression-adjuster package. Includes FRONT LOWER and REAR UPPER adjustable control-arm pairs, FOUR arms total. STANDARD Enforcer does NOT include Overland front drop brackets. Do not purchase duplicate shocks, arms, adjustable bars or factory-shock EXT adapters.

Includes matching corner-specific Plush Ride coils, front brake-line relocation brackets, rear sway-bar links, front/rear bump-stop equipment and mounting hardware. Lift is nominal relative to a four-door Rubicon and varies with actual load/trim; coil position and side-specific springs matter. Check actual wheel backspacing or suitable existing spacers, axle centering, tire/body clearance and suspension travel. Follow the included component instructions; a bolt-on product name is not a blanket no-drilling/no-trimming promise. EVO states its packaged-shock combinations do not require driveshaft replacement; other longer-travel shocks or modified builds need their own clearance review.

Supplier packaging-record weight total: 197 lb. Package count and shipping/freight arrangements are confirmed at fulfillment; this weight is not a freight-price promise. Representative supplier imagery does not establish every adjuster or spring dimension; the selected SKU controls the package.

EVO-3013S4PK · 3.5 Inch · Stage 4 PLUS · 2018–2026 Wrangler JL/JLU GAS3.6L/2.0L, two or four doors. Not diesel,392 or4xe. Includes FOUR EVO SPEC King2.5-inch-diameter shocks, front remote-reservoir and rear piggyback pairs, plus BOTH FRONT AND REAR adjustable track bars. This is not a KA compression-adjuster package. Includes ALL EIGHT front/rear upper/lower adjustable control arms. STANDARD Enforcer does NOT include Overland front drop brackets. Do not purchase duplicate shocks, arms, adjustable bars or factory-shock EXT adapters.

Includes matching corner-specific Plush Ride coils, front brake-line relocation brackets, rear sway-bar links, front/rear bump-stop equipment and mounting hardware. Lift is nominal relative to a four-door Rubicon and varies with actual load/trim; coil position and side-specific springs matter. Check actual wheel backspacing or suitable existing spacers, axle centering, tire/body clearance and suspension travel. Follow the included component instructions; a bolt-on product name is not a blanket no-drilling/no-trimming promise. EVO states its packaged-shock combinations do not require driveshaft replacement; other longer-travel shocks or modified builds need their own clearance review.

Supplier packaging-record weight total: 235 lb. Package count and shipping/freight arrangements are confirmed at fulfillment; this weight is not a freight-price promise. Representative supplier imagery does not establish every adjuster or spring dimension; the selected SKU controls the package.

2018–2026 Jeep Wrangler JL/JLU, 3.6L/2.0L gas, two or four doors; NOT diesel, 392 or 4xe. Includes the appropriate four-corner lift spring set, bump-stop hardware, sway-bar links and specified mounting hardware, plus NO adjustable control arms. No Overland front control-arm drop brackets. NO adjustable track bars included. Confirm axle centering and the actual build before selecting optional adjustable bars. Includes FOUR EVO SPEC King 2.5-inch shocks WITH compression adjusters, front remote-reservoir and rear piggyback pairs. Do not buy duplicate shocks or factory-shock EXT adapters.

2018–2026 Jeep Wrangler JL/JLU, 3.6L/2.0L gas, two or four doors; NOT diesel, 392 or 4xe. Includes the appropriate four-corner lift spring set, bump-stop hardware, sway-bar links and specified mounting hardware, plus NO adjustable control arms. No Overland front control-arm drop brackets. Includes BOTH FRONT AND REAR adjustable track bars. Includes FOUR EVO SPEC King 2.5-inch shocks WITH compression adjusters, front remote-reservoir and rear piggyback pairs. Do not buy duplicate shocks or factory-shock EXT adapters.

2018–2026 Jeep Wrangler JL/JLU, 3.6L/2.0L gas, two or four doors; NOT diesel, 392 or 4xe. Includes the appropriate four-corner lift spring set, bump-stop hardware, sway-bar links and specified mounting hardware, plus FRONT LOWER and REAR UPPER adjustable control-arm pairs, FOUR arms total. No Overland front control-arm drop brackets. NO adjustable track bars included. At this 4.5-inch height BOTH front and rear adjustable track bars are required separately. Includes FOUR EVO SPEC King 2.5-inch shocks WITH compression adjusters, front remote-reservoir and rear piggyback pairs. Do not buy duplicate shocks or factory-shock EXT adapters.

2018–2026 Jeep Wrangler JL/JLU, 3.6L/2.0L gas, two or four doors; NOT diesel, 392 or 4xe. Includes the appropriate four-corner lift spring set, bump-stop hardware, sway-bar links and specified mounting hardware, plus FRONT LOWER and REAR UPPER adjustable control-arm pairs, FOUR arms total. No Overland front control-arm drop brackets. Includes BOTH FRONT AND REAR adjustable track bars. Includes FOUR EVO SPEC King 2.5-inch shocks WITH compression adjusters, front remote-reservoir and rear piggyback pairs. Do not buy duplicate shocks or factory-shock EXT adapters.

2018–2026 Jeep Wrangler JL/JLU, 3.6L/2.0L gas, two or four doors; NOT diesel, 392 or 4xe. Includes the appropriate four-corner lift spring set, bump-stop hardware, sway-bar links and specified mounting hardware, plus ALL EIGHT front/rear upper/lower adjustable control arms, not duplicate lower-stage sets. No Overland front control-arm drop brackets. Includes BOTH FRONT AND REAR adjustable track bars. Includes FOUR EVO SPEC King 2.5-inch shocks WITH compression adjusters, front remote-reservoir and rear piggyback pairs. Do not buy duplicate shocks or factory-shock EXT adapters.

2018–2026 Jeep Wrangler JL/JLU, 3.6L/2.0L gas, two or four doors; NOT diesel, 392 or 4xe. Includes the appropriate four-corner lift spring set, bump-stop hardware, sway-bar links and specified mounting hardware, plus the FRONT LOWER adjustable control-arm pair (TWO arms total). Standard Enforcer configuration WITHOUT Overland front control-arm drop brackets. NO adjustable track bars included. Check actual axle centering, clearances and the existing build before selecting separately purchased adjustable bars; a raised rear bracket is not an adjustable bar. Includes FOUR EVO SPEC King 2.5-inch shocks WITH compression adjusters, with front remote-reservoir and rear piggyback pairs. Do not buy duplicate shocks or factory-shock EXT adapters. Actual lift and clearance depend on vehicle weight, wheels, tires, bump stops and full suspension travel. Follow the common JL Enforcer manual and the application-specific installation exceptions already listed above.