Special offers
Save up to 30%
ICON Universal 2.0 Aluminum Series HD Rear-Valved Shocks
Regular price
$195.65
Fast processing · Usually ships within 1 business day.
Ships from the nearest available warehouse to help reduce delivery time and shipping cost.
Product details
- Vendor ICON Vehicle Dynamics
- Mfr. Part #
Do you have questions about this product?
Couldn't load pickup availability
Choose one universal heavy-duty rear-valved shock by exact stroke and reservoir configuration. Sold EACH, not as a pair. These are custom-application components, not bolt-on Wrangler or Gladiator fitment and not a lift kit.
206513 - 11-Inch Advertised Travel - Non-Reservoir
Exact application and requirements
Sold EACH: one shock, not a pair, not coilover springs and not a suspension lift kit. Heavy-duty rear valving; this does not establish bolt-on vehicle fitment. Manufacturer explicitly states not application specific and custom fabrication may be required. Published extended length 25.75 inches, compressed length 14.93 inches and actual shaft stroke 10.82 inches; 11-inch advertised travel is a nominal label, NOT lift height or guaranteed wheel travel. Manufacturer mounting specification is upper/lower eyelets for 1.5-inch width between tabs and 0.5-inch bolt diameter. Measure mounts and cycle the actual suspension to verify compression, droop and all clearances before purchase; do not select solely by vehicle or lift height. Non-reservoir nitrogen emulsion construction. Fixed damping; rebuildable and revalveable does not mean externally adjustable damping. No mounting bolts, fabrication brackets or complete installation hardware package is promised. Supplier-listed add-ons/service parts are separate and are not included merely because they are mentioned. Manufacturer product photos are representative presentations and are not dimensional or mount-identity evidence; use the exact published specifications and confirm the physical configuration for the build.
Manufacturer features for 206513
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged emulsion shock
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
Manufacturer technical notes
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 25.75"
- COMPRESSED LENGTH: 14.93"
- SHAFT TRAVEL: 10.82"
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 25.75"
- COMPRESSED LENGTH: 14.93"
- SHAFT TRAVEL: 10.82"
- MOUNTING DIMENSIONS: Upper/lower eyelets for 1.5" width between tabs and .5" diameter bolt
Supplier product details
ICON 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades. The 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Like all ICON shock absorbers, 2.0 Aluminum Series shocks are 100 Percent rebuildable and 100 Percent revalveable. For those using their vehicle in extreme off road situations, consider the ICON 2.5 Series shocks to handle extra abuse and punishment your suspension will need to endure.
Features and Benefits:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged emulsion shock
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8 Inch chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100 Percent rebuildable
- 100 Percent revalveable
Details
- Finish: Anodized
- Adjustable Damping: No
- Body Color: Gray
- Body Diameter: 2 Inch
- Boot Included: No
- Bore Diameter: 1.75
- Bushing Color: Black
- Bushing Included: Yes
- Bushing Material: Polyurethane
- Coil Over Springs Included: No
- Compressed Length: 14.93
- Cylinder Material: Aluminum
- Damping Type: Oil
- Dust Boot Included: No
- Dust Shield: No
- Dust Shield Included: No
- Extended Length: 25.75
- Gas Charged: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Includes Bump Stop: No
- Internal Construction Type: Single Tube
- Internal Rebound Bumper: Yes
- Lower Mount Type: Eyelet
- Mounting Hardware Included: No
- Mounting Width: 1.5 Inch X 1/2 Inch Bolt (Upper&Lower)
- Remote Reservoir: No
- Service Parts: 252002 - Universal Spanner Wrench (2.0/2.5/3.0), 254101G - 1/2 Gallon Icon Performance Shock Oil, 252004 - Economy Needle Charging Tool
- Shaft Diameter: 0.625
- Shaft Material: Chrome
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Stroke: 10.82
- Travel Length: 10.82
- Upper Mount Type: Eyelet
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
206513R - 11-Inch Advertised Travel - Remote Reservoir
Exact application and requirements
Sold EACH: one shock, not a pair, not coilover springs and not a suspension lift kit. Heavy-duty rear valving; this does not establish bolt-on vehicle fitment. Manufacturer explicitly states not application specific and custom fabrication may be required. Published extended length 25.75 inches, compressed length 14.93 inches and actual shaft stroke 10.82 inches; 11-inch advertised travel is a nominal label, NOT lift height or guaranteed wheel travel. Manufacturer mounting specification is upper/lower eyelets for 1.5-inch width between tabs and 0.5-inch bolt diameter. Measure mounts and cycle the actual suspension to verify compression, droop and all clearances before purchase; do not select solely by vehicle or lift height. Remote reservoir: verify hose routing and secure reservoir mounting for the build. Fixed damping; rebuildable and revalveable does not mean externally adjustable damping. No mounting bolts, fabrication brackets or complete installation hardware package is promised. Supplier-listed add-ons/service parts are separate and are not included merely because they are mentioned. Manufacturer product photos are representative presentations and are not dimensional or mount-identity evidence; use the exact published specifications and confirm the physical configuration for the build.
Manufacturer features for 206513R
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
Manufacturer technical notes
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 25.75"
- COMPRESSED LENGTH: 14.93"
- SHAFT TRAVEL: 10.82"
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 25.75"
- COMPRESSED LENGTH: 14.93"
- SHAFT TRAVEL: 10.82"
- MOUNTING DIMENSIONS: Upper/lower eyelets for 1.5" width between tabs and .5" diameter bolt
Supplier product details
ICON 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades. The 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Like all ICON shock absorbers, 2.0 Aluminum Series shocks are 100 Percent rebuildable and 100 Percent revalveable.
For those using their vehicle in extreme off road situations, consider the ICON 2.5 Series shocks to handle extra abuse and punishment your suspension will need to endure.
Features and Benefits:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8 Inch chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100 Percent rebuildable
- 100 Percent revalveable
Details
- Material: Aluminum, Steel
- Finish: Anodized
- Adjustable Damping: No
- Body Color: Gray
- Body Diameter: 2 Inch
- Boot Included: No
- Bore Diameter: 1.75
- Bushing Color: Black
- Bushing Included: Yes
- Bushing Material: Polyurethane
- Coil Over Springs Included: No
- Compressed Length: 14.93
- Cylinder Material: Aluminum
- Damping Type: Oil
- Dust Shield: No
- Dust Shield Included: No
- Extended Length: 25.75
- Gas Charged: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Includes Bump Stop: No
- Internal Construction Type: Single Tube
- Internal Rebound Bumper: Yes
- Lower Mount Type: Eyelet
- Mounting Hardware Included: No
- Mounting Width: 1.5 Inch X 1/2 Inch Bolt (Upper&Lower)
- Remote Reservoir: Yes
- Service Parts: 252002 - Universal Spanner Wrench (2.0/2.5/3.0), 254101G - 1/2 Gallon Icon Performance Shock Oil
- Shaft Diameter: 0.625
- Shaft Material: Chrome
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Stroke: 10.82
- Travel Length: 10.82
- Upper Mount Type: Eyelet
- Add On Part: 252012 - -4 To -10 Hose Shield Kit, 614600 - 2.0 Icon Billet Resi Clamp Kit
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
206515 - 15-Inch Advertised Travel - Non-Reservoir
Exact application and requirements
Sold EACH: one shock, not a pair, not coilover springs and not a suspension lift kit. Heavy-duty rear valving; this does not establish bolt-on vehicle fitment. Manufacturer explicitly states not application specific and custom fabrication may be required. Published extended length 34.30 inches, compressed length 19.35 inches and actual shaft stroke 14.95 inches; 15-inch advertised travel is a nominal label, NOT lift height or guaranteed wheel travel. Manufacturer mounting specification is upper/lower eyelets for 1.5-inch width between tabs and 0.5-inch bolt diameter. Measure mounts and cycle the actual suspension to verify compression, droop and all clearances before purchase; do not select solely by vehicle or lift height. Non-reservoir nitrogen emulsion construction. Fixed damping; rebuildable and revalveable does not mean externally adjustable damping. No mounting bolts, fabrication brackets or complete installation hardware package is promised. Supplier-listed add-ons/service parts are separate and are not included merely because they are mentioned. Manufacturer product photos are representative presentations and are not dimensional or mount-identity evidence; use the exact published specifications and confirm the physical configuration for the build.
Manufacturer features for 206515
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged emulsion shock
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
Manufacturer technical notes
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 34.30"
- COMPRESSED LENGTH: 19.35"
- SHAFT TRAVEL: 14.95"
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 34.30"
- COMPRESSED LENGTH: 19.35"
- SHAFT TRAVEL: 14.95"
- MOUNTING DIMENSIONS: Upper/lower eyelets for 1.5" width between tabs and .5" diameter bolt
Supplier product details
ICON 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades. The 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Like all ICON shock absorbers, 2.0 Aluminum Series shocks are 100 Percent rebuildable and 100 Percent revalveable. For those using their vehicle in extreme off road situations, consider the ICON 2.5 Series shocks to handle extra abuse and punishment your suspension will need to endure.
Features and Benefits:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged emulsion shock
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8 Inch chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100 Percent rebuildable
- 100 Percent revalveable
Details
- Material: Aluminum, Steel
- Finish: Anodized
- Adjustable Damping: No
- Body Color: Gray
- Body Diameter: 2 Inch
- Boot Included: No
- Bore Diameter: 1.75
- Bushing Color: Black
- Bushing Included: Yes
- Bushing Material: Polyurethane
- Coil Over Springs Included: No
- Compressed Length: 19.35
- Cylinder Color: Grey
- Cylinder Material: Aluminum
- Damping Type: Oil
- Dust Boot Included: No
- Dust Shield: No
- Dust Shield Included: No
- Extended Length: 34.3
- Gas Charged: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Includes Bump Stop: No
- Internal Construction Type: Single Tube
- Internal Rebound Bumper: Yes
- Lower Mount Type: Eyelet
- Mounting Hardware Included: No
- Mounting Width: 1.5 Inch X 1/2 Inch Bolt (Upper&Lower)
- Remote Reservoir: No
- Service Parts: 252002 - Universal Spanner Wrench (2.0/2.5/3.0), 252004 - Economy Needle Charging Tool, 254101G - 1/2 Gallon Icon Performance Shock Oil
- Shaft Diameter: 0.625
- Shaft Material: Chrome
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Stroke: 14.95
- Travel Length: 14.95
- Upper Mount Type: Eyelet
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
206515R - 15-Inch Advertised Travel - Remote Reservoir
Exact application and requirements
Sold EACH: one shock, not a pair, not coilover springs and not a suspension lift kit. Heavy-duty rear valving; this does not establish bolt-on vehicle fitment. Manufacturer explicitly states not application specific and custom fabrication may be required. Published extended length 34.30 inches, compressed length 19.35 inches and actual shaft stroke 14.95 inches; 15-inch advertised travel is a nominal label, NOT lift height or guaranteed wheel travel. Manufacturer mounting specification is upper/lower eyelets for 1.5-inch width between tabs and 0.5-inch bolt diameter. Measure mounts and cycle the actual suspension to verify compression, droop and all clearances before purchase; do not select solely by vehicle or lift height. Remote reservoir: verify hose routing and secure reservoir mounting for the build. Fixed damping; rebuildable and revalveable does not mean externally adjustable damping. No mounting bolts, fabrication brackets or complete installation hardware package is promised. Supplier-listed add-ons/service parts are separate and are not included merely because they are mentioned. Manufacturer product photos are representative presentations and are not dimensional or mount-identity evidence; use the exact published specifications and confirm the physical configuration for the build.
Manufacturer features for 206515R
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
Manufacturer technical notes
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 34.30"
- COMPRESSED LENGTH: 19.35"
- SHAFT TRAVEL: 14.95"
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 34.30"
- COMPRESSED LENGTH: 19.35"
- SHAFT TRAVEL: 14.95"
- MOUNTING DIMENSIONS: Upper/lower eyelets for 1.5" width between tabs and .5" diameter bolt
Supplier product details
ICON 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades. The 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Like all ICON shock absorbers, 2.0 Aluminum Series shocks are 100 Percent rebuildable and 100 Percent revalveable.
For those using their vehicle in extreme off road situations, consider the ICON 2.5 Series shocks to handle extra abuse and punishment your suspension will need to endure.
Features and Benefits:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8 Inch chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100 Percent rebuildable
- 100 Percent revalveable
Details
- Material: Steel, Aluminum
- Finish: Anodized
- Adjustable Damping: No
- Body Color: Gray
- Body Diameter: 2 Inch
- Boot Included: No
- Bore Diameter: 1.75
- Bushing Color: Black
- Bushing Included: Yes
- Bushing Material: Polyurethane
- Coil Over Springs Included: No
- Compressed Length: 19.35
- Cylinder Color: Grey
- Cylinder Material: Aluminum
- Damping Type: Oil
- Dust Boot Included: No
- Dust Shield: No
- Dust Shield Included: No
- Extended Length: 34.3
- Gas Charged: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Includes Bump Stop: No
- Internal Construction Type: Single Tube
- Internal Rebound Bumper: Yes
- Lower Mount Type: Eyelet
- Mounting Hardware Included: No
- Mounting Width: 1.5 Inch X 1/2 Inch Bolt (Upper&Lower)
- Remote Reservoir: Yes
- Service Parts: 254101G - 1/2 Gallon Icon Performance Shock Oil, 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- Shaft Diameter: 0.625
- Shaft Material: Chrome
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Stroke: 14.95
- Travel Length: 14.95
- Upper Mount Type: Eyelet
- Add On Part: 252012 - -4 To -10 Hose Shield Kit, 614600 - 2.0 Icon Billet Resi Clamp Kit
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
206516 - 17-Inch Advertised Travel - Non-Reservoir
Exact application and requirements
Sold EACH: one shock, not a pair, not coilover springs and not a suspension lift kit. Heavy-duty rear valving; this does not establish bolt-on vehicle fitment. Manufacturer explicitly states not application specific and custom fabrication may be required. Published extended length 38.05 inches, compressed length 21.10 inches and actual shaft stroke 16.95 inches; 17-inch advertised travel is a nominal label, NOT lift height or guaranteed wheel travel. Manufacturer mounting specification is upper/lower eyelets for 1.5-inch width between tabs and 0.5-inch bolt diameter. Measure mounts and cycle the actual suspension to verify compression, droop and all clearances before purchase; do not select solely by vehicle or lift height. Non-reservoir nitrogen emulsion construction. Fixed damping; rebuildable and revalveable does not mean externally adjustable damping. No mounting bolts, fabrication brackets or complete installation hardware package is promised. Supplier-listed add-ons/service parts are separate and are not included merely because they are mentioned. Manufacturer product photos are representative presentations and are not dimensional or mount-identity evidence; use the exact published specifications and confirm the physical configuration for the build.
Manufacturer features for 206516
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged emulsion shock
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
Manufacturer technical notes
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 38.05"
- COMPRESSED LENGTH: 21.10"
- SHAFT TRAVEL: 16.95"
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 38.05"
- COMPRESSED LENGTH: 21.10"
- SHAFT TRAVEL: 16.95"
- MOUNTING DIMENSIONS: Upper/lower eyelets for 1.5" width between tabs and .5" diameter bolt
Supplier product details
ICON 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades. The 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Like all ICON shock absorbers, 2.0 Aluminum Series shocks are 100 Percent rebuildable and 100 Percent revalveable. For those using their vehicle in extreme off road situations, consider the ICON 2.5 Series shocks to handle extra abuse and punishment your suspension will need to endure.
Features and Benefits:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged emulsion shock
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8 Inch chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100 Percent rebuildable
- 100 Percent revalveable
Details
- Material: Aluminum, Steel
- Finish: Anodized
- Adjustable Damping: No
- Body Color: Gray
- Body Diameter: 2 Inch
- Boot Included: No
- Bore Diameter: 1.75
- Bushing Color: Black
- Bushing Included: Yes
- Bushing Material: Polyurethane
- Coil Over Springs Included: No
- Compressed Length: 21.1
- Cylinder Color: Grey
- Cylinder Material: Aluminum
- Damping Type: Oil
- Dust Boot Included: No
- Dust Shield: No
- Extended Length: 38.05
- Gas Charged: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Includes Bump Stop: No
- Internal Construction Type: Single Tube
- Internal Rebound Bumper: Yes
- Lower Mount Type: Eyelet
- Mounting Hardware Included: No
- Mounting Width: 1.5 Inch X 1/2 Inch Bolt (Upper&Lower)
- Remote Reservoir: No
- Service Parts: 252002 - Universal Spanner Wrench (2.0/2.5/3.0), 252004 - Economy Needle Charging Tool, 254101G - 1/2 Gallon Icon Performance Shock Oil
- Shaft Diameter: 0.625
- Shaft Material: Chrome
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Stroke: 16.95
- Travel Length: 16.95
- Upper Mount Type: Eyelet
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
206516R - 17-Inch Advertised Travel - Remote Reservoir
Exact application and requirements
Sold EACH: one shock, not a pair, not coilover springs and not a suspension lift kit. Heavy-duty rear valving; this does not establish bolt-on vehicle fitment. Manufacturer explicitly states not application specific and custom fabrication may be required. Published extended length 38.05 inches, compressed length 21.10 inches and actual shaft stroke 16.95 inches; 17-inch advertised travel is a nominal label, NOT lift height or guaranteed wheel travel. Manufacturer mounting specification is upper/lower eyelets for 1.5-inch width between tabs and 0.5-inch bolt diameter. Measure mounts and cycle the actual suspension to verify compression, droop and all clearances before purchase; do not select solely by vehicle or lift height. Remote reservoir: verify hose routing and secure reservoir mounting for the build. Fixed damping; rebuildable and revalveable does not mean externally adjustable damping. No mounting bolts, fabrication brackets or complete installation hardware package is promised. Supplier-listed add-ons/service parts are separate and are not included merely because they are mentioned. Manufacturer product photos are representative presentations and are not dimensional or mount-identity evidence; use the exact published specifications and confirm the physical configuration for the build.
Manufacturer features for 206516R
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
Manufacturer technical notes
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 38.05"
- COMPRESSED LENGTH: 21.10"
- SHAFT TRAVEL: 16.95"
- TECH NOTE: Not application specific and may require custom fabrication to mount to vehicle.
- EXTENDED LENGTH: 38.05"
- COMPRESSED LENGTH: 21.10"
- SHAFT TRAVEL: 16.95"
- MOUNTING DIMENSIONS: Upper/lower eyelets for 1.5" width between tabs and .5" diameter bolt
Supplier product details
ICON 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades. The 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Like all ICON shock absorbers, 2.0 Aluminum Series shocks are 100 Percent rebuildable and 100 Percent revalveable.
For those using their vehicle in extreme off road situations, consider the ICON 2.5 Series shocks to handle extra abuse and punishment your suspension will need to endure.
Features and Benefits:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8 Inch chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100 Percent rebuildable
- 100 Percent revalveable
Details
- Material: Steel, Aluminum
- Finish: Anodized
- Adjustable Damping: No
- Body Color: Gray
- Body Diameter: 2 Inch
- Boot Included: No
- Bore Diameter: 1.75
- Bushing Color: Black
- Bushing Included: Yes
- Bushing Material: Polyurethane
- Coil Over Springs Included: No
- Compressed Length: 21.1
- Cylinder Color: Grey
- Cylinder Material: Aluminum
- Damping Type: Oil
- Dust Boot Included: No
- Dust Shield: No
- Dust Shield Included: No
- Extended Length: 38.05
- Gas Charged: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Includes Bump Stop: No
- Internal Construction Type: Single Tube
- Internal Rebound Bumper: Yes
- Lower Mount Type: Eyelet
- Mounting Hardware Included: No
- Mounting Width: 1.5 Inch X 1/2 Inch Bolt (Upper&Lower)
- Remote Reservoir: Yes
- Service Parts: 254101G - 1/2 Gallon Icon Performance Shock Oil, 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- Shaft Diameter: 0.625
- Shaft Material: Chrome
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Stroke: 16.95
- Travel Length: 16.95
- Upper Mount Type: Eyelet
- Add On Part: 614600 - 2.0 Icon Billet Resi Clamp Kit, 252012 - -4 To -10 Hose Shield Kit
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov